Operation Manual

Ancillary equipment
78
HAND THROTTLE
(if fitted)
The hand throttle is for use in conjunction
with power take-off equipment (winches,
pumps etc.), when a relatively constant engine
speed is required.
WARNING
DO NOT attempt to use the hand throttle
when the vehicle is being driven.
Operating the hand throttle
1. Select ’N’ (neutral) in the transfer gearbox.
2. Pull the hand throttle control out until the
desired engine speed is achieved.
3. Twist the control clockwise to lock the
throttle in position.
The accelerator pedal can be used to
temporarily over-ride the hand throttle (to
increase engine speed). Once the accelerator
is released, the engine speed will return to the
level set by the hand throttle.
To turn the hand throttle off, twist the control
fully in (to the closed position).
Ensure the hand throttle is fully closed before
driving.