Operation Manual

Starter switch & steering lock
47
To unlock the steering column
Insert the ignition key FULLY and turn the
starter switch to position ’I’, while turning the
steering wheel slightly to disengage the lock.
To lock the steering column
Turn the starter switch to position ’0’ and
withdraw the key from the starter switch. Turn
the steering wheel towards the straight ahead
position until the lock engages.
WARNING
DO NOT remove the key or turn the starter
switch to position ’0’ while the vehicle is in
motion. Once the steering lock is engaged,
it is impossible to steer the vehicle.
STARTER SWITCH
The starter switch is located to the left of the
steering column, and uses the following
sequence of key positions to operate the
steering lock, electrical circuits and starter
motor.
Position ’0’
Steering locked (if key is removed).
Most lighting circuits are operational,
including: sidelights, headlights, hazard
warning lights and rear fog guard lights.
Position ’I’
Steering unlocked.
Radio/cassette player can be operated.
Position ’II’
All instruments, warning lights and electrical
circuits are operational.
Position ’III’
Starter motor operates.
Release the key immediately the engine starts
(the key will automatically return to position
’II’).
Note that operation of position ’I’ electrical
functions will be interrupted during engine
cranking.