Operation Manual

Lights & indicators
33
Headlight levelling (if fitted)
The height of the headlight beams is affected
by the distribution of weight inside the vehicle.
Always ensure your headlights are adjusted so
that the point at which they meet the road
surface ahead of the vehicle provides
adequate illumination, without dazzling other
road users.
The following load conditions should be used
as a guide.
Position ’0’: Driver only, or driver and all front
seats occupied (loadspace empty).
Position ’1’: All seats occupied (loadspace
empty).
Position ’2’: All seats occupied by adults and
loadspace loaded to maximum rear axle
weight.
Position ’3’: Driver only with the loadspace
loaded to maximum rear axle weight.
NOTE: The maximum rearaxle weight can be
found in the ’Generaldata’ section.
Vehicles fitted with front seats only:
Positions ’1’ and ’2’ should only be used when
required, according to the distribution and
weight of the load being carried.