Operation Manual

Instruments
28
1. Speedometer
Indicates road speed in miles and/or
kilometres per hour.
2. Anti-theft alarm indicator light
Indicates the status of the alarm system (see
’Locks & alarm’).
3. Total distance and trip recorder
Indicates the total distance or the individual
journey distance travelled by the vehicle.
4. Total distance and trip recorder
mode/reset button
Press and release the mode button to change
the digital display between either the total
distance the vehicle has travelled, or the
individual journey distance. Press and hold
the button to reset the trip recorder to zero.
5. Fuel gauge
The pointer indicates the fuel level when the
starter switch is turned to position ’II’.
6. Temperature gauge
Once the engine coolant has reached its
normal operating temperature, the pointer
should remain between the ’C’ (cold) and
’H’ (hot) segments. If the pointer enters the
’H’ segment, stop the vehicle as soon as
safety permits and seek qualified assistance
before continuing.
7. Clock
To adjust the time, use a ball point pen or
similar probe to advance or put back the time,
using the right or left hand buttons at the
bottom of the clock bezel.
NOTE: The clock will need to be reset if the
battery has been disconnected.
8. Warning lights
The specification of the warning lights will
vary according to model and market
requirements (see ’Warning lights’).