Operation Manual

Seat belts
25
WARNING
At all times, occupants should wear a seat
belt for their protection in the event of a
collision or sudden stop. In some
circumstances, perhaps due to the vehicle
being on a slope, the automatic locking
mechanism may engage, preventing the
initial extension of the belt. This is not a
fault - ease the belt free and use it.
Fastening the inertia reel belts
Draw the belt over the shoulder and across
the chest, and insert the metal tongue plate
into the lock nearest the wearer - a ’click’
indicates that the belt is securely locked.
Seat belts are designed to bear upon the bony
structure of the body (pelvis, chest and
shoulders) and can only be worn safely with
the webbing crossing the shoulder MIDWAY
BETWEEN THE NECK AND THE EDGE OF THE
SHOULDER and with the seats in a normal
UPRIGHT position - DO NOT allow the front
passenger to travel with the seat steeply
reclined.
Lap belts
To adjust, pull the slider along the belt and
feed the webbing through the buckle until the
belt is comfortably tight. When not in use, the
lap belts should be fastened.