Operation Manual

Seats
22
FOLDING THE REAR SEATS - (if fitted)
Before folding the rear seats;
• Slide the front seats forward.
• Ensure that the outer rear seat belts are
correctly stowed in their belt clips.
• Pass the seat belt locks through the
junction of the backrest and the cushion
and into the loadspace.
Individually split rear seats
NOTE: The two outer seatsmust be folded
first, thereby releasing the centre seat.
Outer seats;
1. Release the catch (see first inset).
2. Fold the backrest forward.
3. Slide back the bolt (see second inset).
4. Lift and fold the seat base forwards.
Centre seat;
5. Release the catch - as (1).
6. Fold the backrest forward.
7. Lift and fold the seat base forwards.
When returning the backrest to the upright
position, ensure it is securely latched in place
before driving.
WARNING
DO NOT adjust the seats while the vehicle is
in motion.
When the seat is erected, the latching
mechanism should be visually checked and
physically tested to ensure that the latch is
secure before driving.