Operation Manual

Workshop maintenance
135
Tdi engine
• Turn the starter switch to position ’0’ and
disconnect the battery negative lead.
• Clean the area around the filter head (1)
and place a container under the filter.
• Using a strap wrench, unscrew the filter
(2) and catch the fuel released in the
container.
• Wet the seal of the new filter (3) with
diesel fuel and screw the filter into
position and tighten.
• Ensure that the drain tap (4) at the base of
the filter is closed.
• Connect the battery negative lead.
• Start the engine and check for leaks.