Operation Manual

Workshop maintenance
131
UNDERTRAY ACCESS PANELS
Front:
The front access panel can be removed in
order to fit the engine timing cover wading
plug.
• Remove the five bolts securing the front
access panel to the undertray and
withdraw the panel.
• When refitting the access panel, tighten
the bolts to a torque rating of 14 Nm (10
lbf/ft).
Rear:
The rear access panel can be removed in
order to fit the flywheel housing wading
plug and to access the engine oil drain
plug.
• Rotate the panel anti-clockwise to
disengage the locking flanges, then
withdraw the panel from the undertray.