Operation Manual

Washer jets & wiper blades
100
WASHER JETS
To adjust a washer jet, insert a needle into the
jet orifice (see inset) and lever gently to
position the jet.
WIPER BLADE REPLACEMENT
To renew a windscreen or rear screen wiper
blade, lift the wiper arm away from the
windscreen, press the retaining clip (arrowed
in illustration), push the blade away from the
arm and then unhook the wiper blade.
Locate the new blade assembly on the arm,
hook it to the swivel bracket and push into
engagement until the blade is retained by the
clip.
Always fit wiper blades that are identical to the
original specification.