User Guide

• Cat. 1 & 2 hitch

• 20” or 22” Notched blades

• 3” Square frame tube

• 7-1/2” Blade spacing

• Angle front and rear gangs up to 21 degrees

• Adjustment handle to aid in angling

• 1/2” Thick bearing hangers with two 5/8” U-bolts

• Self aligning, sealed ball bearings

• 1-1/8” Square, high carbon steel gang axle

• 4” x 3” Gang tube

• Optional disc scrapers are adjustable

• Optional 9” center sweep shank

DH25 SERIES

40 - 100 HP — 72” 96”

Heavy-duty 1/2” thick bearing

hangers resist the high torque

from two 5/8” U-bolts.

Disc scrapers are

available to reduce

build-up on discs.

* Wider cutting may be obtained by adjusting

complete gang on gang tube. Adjusting too wide

can leave strip in center of unit. Center sweep can

help alleviate this.

PAGE 1
DH25 Series 40 - 100 HP — 72” 96” • Cat. 1 & 2 hitch • 20” or 22” Notched blades • 3” Square frame tube • 7-1/2” Blade spacing • Angle front and rear gangs up to 21 degrees • Adjustment handle to aid in angling • 1/2” Thick bearing hangers with two 5/8” U-bolts • Self aligning, sealed ball bearings • 1-1/8” Square, high carbon steel gang axle • 4” x 3” Gang tube • Optional disc scrapers are adjustable • Optional 9” center sweep shank 27 Disc scrapers are available to reduce build-up on discs.