Instruction Manual

NIGHTY
NIGHTSTAND
Made in Vietnam - r03 Page 2 of 2
Customer Service 800.933.9904 | Latest instructions available on www.landofnod.com
2
3
NOTE: Do not over
tighten the bolts
Attach top panel to assembly with 2 large bolts, 2
spring washers and 2 flat washers per upright.
Secure, but do not over tighten, bolts with a phillip
head screwdriver.
A. Remove pre-attached small bolt from pull.
Set hardware aside and discard bracket.
B. Position pull as shown and fasten with 1
small bolt from inside door. Secure with a
screwdriver.
Assembly is now complete.
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the unit is finished
with a protective clear lacquer.
CLEANING AND CARE
pull
bracket
top panel