Instruction Manual

ManualsBrandsLand of Nod ManualsFurnitureDollhouse Bookcase

DOLLHOUSE

BOOKCASE

Made in Vietnam - r05 Page 1 of 5

HARDWARE

COMPONENTS

TOOLS REQUIRED

Thank you for purchasing the Dollhouse Bookcase.

This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as

the individual components

to this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

Customer Service 800.933.9904 | Latest instructions available on www.landofnod.com

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

22 - wood

dowels

2 - side panels

(1 left, 1 right)

1 - middle shelf1 - top shelf

1 - bottom panel 1 - small partition1 - large partition

2 - roof panels 1 - bottom back panel 1 - top back panel1 - middle back panel

30 - large

bolts

16 - small

screws

30 - flat

washers

30 - spring

washers

WARNING: Adult Assembly Required

Missing hardware? Please call 800.933.9904 for replacements.

NOTE: Contains small parts. To avoid danger keep away from

small children.

1 - medium partition

Summary of content (5 pages)

PAGE 1
DOLLHOUSE BOOKCASE HARDWARE 22 - wood dowels 30 - large bolts 30 - flat washers Thank you for purchasing the Dollhouse Bookcase. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. 16 - small screws 30 - spring washers Missing hardware? Please call 800.933.9904 for replacements.
PAGE 2
DOLLHOUSE BOOKCASE NOTE: Top shelf has pilot holes on the left side NOTE: Middle shelf has pilot holes on the right side A A B B large partition 1 NOTE: Make sure ledge of partition is facing right side of shelf as shown. A) Insert 2 wood dowels into middle shelf as shown. B) Attach 1 large partition to middle shelf with 2 large bolts, 2 spring washers and 2 flat washers as shown. Secure, but do not over tighten, bolts with a phillips head screwdriver.
PAGE 3
DOLLHOUSE BOOKCASE small partition NOTE: Make sure angled edge of partition is facing towards the right A A B B 5 7 A) Insert 6 wood dowels into shelf assembly as shown. B) Fit dowels of assembly into corresponding holes of bottom panel and secure with 6 large bolts, 6 spring washers and 6 flat washers. Fit pre-assembled dowels of roof panel into corresponding holes of remaining roof panel, and secure with 2 large bolts, 2 spring washers and 2 flat washers as shown.
PAGE 4
DOLLHOUSE BOOKCASE 9 Attach top back panel to assembly with 6 small screws as shown. Secure, but do not over tighten, screws with a screwdriver. 10 Attach middle back panel to assembly with 3 small screws as shown. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer. 11 Attach bottom back panel to assembly with 7 small screws as shown. Assembly is now complete.
PAGE 5
DOLLHOUSE BOOKCASE ! WARNING Serious or fatal crushing injuries can occur from furniture tip over. Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over. To help prevent tip-over, install tip restraint per instructions below. MOUNTING HARDWARE mounting bracket large screw mounting bracket C 4 - plastic anchors 4 - small screws 2 - wall straps 4 - large screws 4 - mounting brackets Missing hardware? Please call 800.933.9904 for replacements. NOTE: Contains small parts.