Owner's manual

ManualsBrandsLand of Nod ManualsFurnitureCube Collection 8 Cube Bookcase

CU BE

8-CUBE BOOKCASE

Made in Thailand - r04 Page 1 of 4

HARDWARE

COMPONENTS

Thank you for purchasing the 8 Cube Bookcase. This

page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

Customer Service 800.933.9904 | Latest instructions available on www.landofnod.com

20 - flat

washers

20 - spring

washers

1 - top panel 1- bottom panel

2 - side panels

(1 left, 1 right)

3 - shelves

Insert 10 wood dowels into each side panel as

shown.

2 - back

panels

1 - partition

WARNING: Adult Assembly Required

side panel

Missing hardware? Please call 800.933.9904 for replacements.

NOTE: Contains small parts. Keep away from small children.

TOOLS REQUIRED

phillips head screwdriver allen wrench (included)

(We recommend the use of hand tools instead of power tools)

24 - small

screws

20 - bolts

24 - wood

dowels

2 - large

screws

Summary of content (4 pages)

PAGE 1
CU BE 8-CUBE BOOKCASE HARDWARE 24 - wood dowels 20 - bolts 24 - small screws 2 - large screws 20 - spring washers 20 - flat washers Missing hardware? Please call 800.933.9904 for replacements. NOTE: Contains small parts. Keep away from small children. Thank you for purchasing the 8 Cube Bookcase. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
CU BE 8-CUBE BOOKCASE shelf shelf shelf top panel partition bottom panel 2 Insert 2 wood dowels into top and bottom panel as shown. 3 With the assistance of another adult, fit slots of each shelf into corresponding slots of partition as shown. NOTE: Do not over tighten the screws top panel 4 Fit dowels of top and bottom panel into corresponding holes of assembled unit as shown. Secure bottom panel with 2 large screws using a phillips head screwdriver. Do not over tighten the screws.
PAGE 3
CU BE 8-CUBE BOOKCASE NOTE: Do not over tighten the bolts Fit dowels of left and right side panel into corresponding holes of assembled unit as shown. Secure each side panel with 10 bolts, 10 spring washers and 10 flat washers using an allen wrench. Do not over tighten the bolts. right side panel left side panel 5 With the assistance of another adult, position assembled unit as shown. Attach each back panel to assembly with 24 small screws using a screwdriver. Assembly is now complete.
PAGE 4
CU BE 8-CUBE BOOKCASE ! WARNING Serious or fatal crushing injuries can occur from furniture tip over. Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over. To help prevent tip-over, install tip restraint per instructions below. MOUNTING HARDWARE mounting bracket large screw mounting bracket C plastic anchor 2 - wall straps 4 - plastic anchors 4 - small screws 4 - large screws 4 - mounting brackets Missing hardware? Please call 800.933.9904 for replacements.