User guide

ManualsBrandsLand of Nod ManualsFurnitureCube Collection 6 Cube Bookcase

CUBE

6-CUBE BOOKCASE

Made in Thailand - r05 Page 1 of 4

HARDWARE

COMPONENTS

Thank you for purchasing the 6 Cube Storage

Bookcase. This page

lists all the contents included in

the box. Please take the time

to identify the hardware as

well as the individual components

to this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

Customer Service 800.933.9904 | Latest instructions available on www.landofnod.com

12 - flat

washers

12 - spring

washers

1 - top panel 1- bottom panel

2 - side panels

(1 left, 1 right)

2 - partitions2 - back

panels

1 - middle panel

Missing hardware? Please call 800.933.9904 for replacements.

NOTE: Contains small parts. Keep away from small children.

TOOLS REQUIRED

20 - wood

dowels

phillips head screwdriver allen wrench (included)

(We recommend the use of hand tools instead of power tools)

23 - screws 4 - large

screws

12 - bolts

WARNING: Adult Assembly Required

Summary of content (4 pages)

PAGE 1
CU BE 6-CUBE BOOKCASE HARDWARE 20 - wood dowels 12 - bolts 23 - screws 4 - large screws 12 - spring washers 12 - flat washers Missing hardware? Please call 800.933.9904 for replacements. NOTE: Contains small parts. Keep away from small children. Thank you for purchasing the 6 Cube Storage Bookcase. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
CU BE 6-CUBE BOOKCASE partition side panel 1 Insert 6 wood dowels into each side panel as shown. 2 Insert 4 wood dowels into each partition as shown. NOTE: Do not over tighten the screws partition partition middle panel 3 bottom panel With the assistance of another adult, fit slots of each partition into corresponding slots of middle panel as shown. Made in Thailand - r05 4 Position assembly as shown. Fit dowels of partitions into corresponding holes of bottom panel as shown.
PAGE 3
CU BE 6-CUBE BOOKCASE NOTE: Do not over tighten the bolts left side panel top panel right side panel 5 Fit dowels of partitions into corresponding holes of top panel as shown. 6 Fit dowels of left and right side panels into corresponding holes of assembled unit as shown. Secure each side panel with 6 bolts, 6 spring washers and 6 flat washers using an allen wrench. Cleaning and Care Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
PAGE 4
CU BE 6-CUBE BOOKCASE ! WARNING Serious or fatal crushing injuries can occur from furniture tip over. Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over. To help prevent tip-over, install tip restraint per instructions below. MOUNTING HARDWARE mounting bracket large screw mounting bracket C plastic anchor 2 - wall straps 4 - plastic anchors 4 - small screws 4 - large screws 4 - mounting brackets Missing hardware? Please call 800.933.9904 for replacements.