Manual

1
Insert 4 cam screws into left and right side
frames as shown. Secure, but do not over
tighten, with a phillips head screwdriver.
Fit pre-assembled dowels of bottom apron into
corresponding holes of bottom side rail as
shown.
2
3 4
Made in Thailand - r04 Page 2 of 3
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
NOTE: Do not over
tighten the cam screws
BIN TABLE
A) Insert 2 cams into 2 bottom side rails as
shown.
B) Insert 2 cams into 2 top aprons as shown.
A. Fit dowels of top and bottom aprons into
corresponding holes of right side frame as
shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam
screw.
B. Fit bottom panel into corresponding grooves
of bottom aprons as shown.
left and right
side frames
A
B
bottom side rail
top apron
NOTE: Make sure
arrows on each cam
point towards nearest
edge with holes.
bottom apron
bottom side rail
top apron
B
bottom apron
bottom
panel
A
right side
frame