Manual

WARNING: Adult Assembly Required

Made in Thailand - r04 Page 1 of 3

Thank you for purchasing the Bin Table. This page

lists

all the contents included in the box. Please take the time

to identify the hardware as well as the individual

components

to this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com

ASSEMBLY HARDWARE

8 - cams 4 - bolts8 - cam

screws

TOOLS REQUIRED

phillips head screwdriver

allen wrench (included)

Missing hardware? Please call 800.933.9904 for replacements.

NOTE: Contains small parts. Keep away from small children.

(We recommend the use of hand tools instead of power tools)

BIN TABLE

COMPONENTS

1 - tabletop

1 - bottom panel

2 - side frames

(1 left, 1 right)

2 - bottom aprons 2 - top aprons2 - bottom side rails

PAGE 1
BIN TABLE ASSEMBLY HARDWARE 8 - cams 8 - cam screws 4 - bolts Missing hardware? Please call 800.933.9904 for replacements. NOTE: Contains small parts. Keep away from small children. TOOLS REQUIRED phillips head screwdriver Thank you for purchasing the Bin Table. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
BIN TABLE NOTE: Do not over tighten the cam screws NOTE: Make sure arrows on each cam point towards nearest edge with holes. A bottom side rail B top apron left and right side frames 1 Insert 4 cam screws into left and right side frames as shown. Secure, but do not over tighten, with a phillips head screwdriver. 2 A) Insert 2 cams into 2 bottom side rails as shown. B) Insert 2 cams into 2 top aprons as shown.
PAGE 3
BIN TABLE NOTE: Do not over tighten the bolts bottom apron tabletop top apron left side frame 5 Fit dowels of top and bottom aprons into corresponding holes of left side frame as shown. Using a screwdriver, turn each cam clockwise until it securely engages each cam screw. 6 With assistance of another adult, place tabletop face down onto a clean padded surface as shown. Fit base assembly over supports of tabletop and attach with 4 bolts. Secure, but do not over tighten, bolts with an allen wrench.