Owner manual

BEAT OUR CHEST

TOY CHEST

WARNING

Failure to install lid supports can cause injury. Follow all installation instruc-

tions provided:

• The purpose of the lid supports is to prevent the lid from closing too quickly.

• After installation check lid support to ensure that the lid stays open in any

position.

• It is important to check the lid supports frequently to ensure that they are

working properly.

If the lid supports are not holding the properly please contact The Land of Nod.

PAGE 1
BEAT OU R CHEST TOY CHEST ! WARNING Failure to install lid supports can cause injury. Follow all installation instructions provided: • The purpose of the lid supports is to prevent the lid from closing too quickly. • After installation check lid support to ensure that the lid stays open in any position. • It is important to check the lid supports frequently to ensure that they are working properly. If the lid supports are not holding the properly please contact The Land of Nod.
PAGE 2
BEAT OU R CHEST TOY CHEST HARDWARE 8 - wood dowels 26 - spring washers 16 - screws 26 - bolts 26 - flat washers 2 - lid supports Missing hardware? Please call 800.933.9904 for replacements. NOTE: Contains small parts. Keep away from small children. Thank you for purchasing the Beat Our Chest Toy Chest. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 3
BEAT OU R CHEST TOY CHEST front panel A B A B 2 left side panel right side panel A. Insert 2 wood dowels into left and right side panels as shown. B. Fit dowels into front panel, and secure with 6 bolts, 6 spring washers and 6 flat washers. 3 With assistance of another adult, position unit upside down. Attach bottom panel to assembly with 14 bolts, 14 spring washers and 14 flat washers. NOTE: Do not over tighten the screws 4 Position unit upright.