Installation Instructions

9
LANCOM Installation Guide – Initial Setup
EN
Configuration via the LANCOM Management Cloud
In order to configure a LANCOM device via the LANCOM Management
Cloud (LMC), it must first be integrated into the LMC.
Integrating the device into the LMC requires the device to be
connected to the Internet and able to reach cloud.lancom.de. If a
router that is intended to provide Internet access is to be integrated
into the LMC, the first step is to perform a basic configuration and
to configure an Internet connection.
There are two different methods of integrating a LANCOM device into the
LANCOM Management Cloud:
A Integration into the LANCOM Management Cloud by serial number and
Cloud PIN
A Integration into the LANCOM Management Cloud by activation code
Integration into the LMC by serial number and Cloud PIN
If you have purchased a LANCOM device that was shipped with LCOS
version 10.0 or later – i.e. it is already “Cloud-ready” – all you have to do
is simply add the device to a project in the LANCOM Management Cloud
(Public).
You will need the serial number of the device and the associated Cloud
PIN. You can find the serial number on the bottom of the device or in
LANconfig or WEBconfig. The Cloud PIN can be found on the Cloud-ready
flyer, supplied with the device.
4