Operation Manual

Operating modes and functions
ELSA LANCOM Wireless
59
English
connection on the DEFAULT route. This has been preset in the unit's factory
defaults.
햴
Next, enter the remote station for routing via NetBIOS. Change over to the
ELSA
LANconfig
'NetBIOS' configuration section and create a new entry in the 'NetBIOS
via IP Routing' table.
Alternatively, enter the following when configuring via telnet:
cd /Setup/NetBIOS-module/Remote-table
set nhamel.mobil router
The entry in the 'Type' field specifies whether a connection to the remote station
should be dialed up to exchange name information after switching on the NetBIOS
module.
The 'NT-domain' parameter can generally be left blank in the case of Windows 95 or 98
networks. The corresponding domain/workgroup must be entered manually when
accessing Windows NT machines.
햵
If the NetBIOS link uses a PPP connection, check the PPP list for the activation of
NetBIOS for the corresponding entry.
햶
Once all remote stations have been entered, activate the NetBIOS function.
cd /Setup/NetBIOS-module
set operating on
After switching the module on, a connection is established after an unspecified
waiting time to all remote stations not identified as dial-up nodes. The required
information regarding the other computers in the networks is then exchanged during