Operation Manual

Operating modes and functions
ELSA LANCOM Wireless
23
English
Operating modes and functions
This section is an introduction to the functions and operating modes of your device. It
includes information on the following points:
쮿
Wireless connections
쮿
Security for your configuration
쮿
Security for your LAN
쮿
Charge management
쮿
ISDN connections
쮿
PPP support
쮿
IP routing
쮿
Automatic address administration with DHCP
쮿
DNS server
쮿
NetBIOS proxy
쮿
ELSA LANCAPI
쮿
Time check
쮿
Least-cost router
Alongside the description of the individual points, we will also give you instructions to
support you as you configure your device.
Please refer to the electronic documentation for a detailed description of all parameters
and menus.
Parameters for the wireless connection
The same values must be set for a variety of parameters to ensure that the wireless
network adapters in the mobile stations and access points can identify each other and
exchange data with one another.
All wireless network adapters (in base and mobile stations) that use the same
parameters make up a wireless network. The selection of these parameters can be used
specifically to set up separate wireless networks that do not interfere with one another.
The parameters for the wireless network adapters in the access points are configured via
ELSA LANconfig or Telnet.
햲
Start up
ELSA LANconfig by clicking
Start
왘
Programs
왘
ELSAlan
왘
ELSA
LANconfig
. The ELSA LANconfig now automatically searches for all access points
in the LAN and WLAN.