Operation Manual

Installation
ELSA LANCOM Wireless
13
English

The 'WAN Channel-1' LED on the access point shows the activity on the first
B channel on the ISDN port.

The 'WAN Channel-2' LED on the access point shows the activity on the second
B channel on the ISDN port.

The Reset button is recessed in the case and can only be reached with a pointed
object such as a paper clip. Press the Reset button until all of the LEDs light up to
reset the unit to its factory defaults.
Now turn the whole thing around and take a look at the bottom. There you'll find:

Connection for power supply unit

10Base-T network connection

ISDN S
0
port
Connecting the access point
햲
Connect the
ELSA LANCOM Wireless L-2 access point to the LAN. Insert the
included network cable into the 10Base-10 MBitconnection of the access point and
into a free network connection socket of your local network such as on the hub of
your LAN.
햳
Connect the router to an ISDN-S
0
multifunction port or system port (point-to-
multipoint or point-to-point configuration). To take advantage of the charge
protection and charge statistics, request the 'charge transfer
during
the connection'
ISDN feature (under AOCD) from your telephone company.
햴
Insert the
ELSA AirLancer MC-2 wireless network adapter in the access point. The
LEDs of the PC card must face toward the front of the access point.
햵
Connect the AC adapter to the access point. The 'Power/Msg' LED on the front
panel of the unit lights up after a short self-test. The red LED of the wireless
network adapter indicates that a connection has been established between the card
쐃쐇쐋