Operation Manual

Description of the menu options
ELSA LANCOM Wireless
R73
English
Table-DHCP
In the DCHP module, the 'Table-DCHP' option allows you to verify (or look up) the
assignment of IP addresses to the relevant computers. This table has the following
layout:
쮿
IP-address: IP address assigned
쮿
MAC-address: Computer's Ethernet address
쮿
Timeout: Time remaining until the assignment becomes invalid
쮿
Hostname: Computer’s name in plain text if it was transmitted in the request
쮿
Type: This field contains additional information on the assignment.
The 'Type' field specifies how the address was assigned. This field can assume the
following values:
–
new
: The computer has made its initial request. The DHCP server verifies the
uniqueness of the address that is to be assigned to the computer.
–
unkn.
: While verifying uniqueness, it was determined that the address has
already been assigned to another computer. Unfortunately, the DHCP server has
no means of obtaining additional information on this computer.
–
stat.
: A computer has informed the DHCP server that it has a fixed IP address.
This address can no longer be used.
–
dyn.
: The DHCP server assigned an address to the computer.
Setup/NetBIOS
The Setup/NetBIOS menu contains the settings for the NetBIOS module. The menu has
the following layout:
IP-address MAC-address Timeout Hostname Type
10.1.1.10 00a0570308e1 500 ELSA new
State On or off
Scope-ID NetBIOS scope in which the router is located.
NT-Domain Workgroup/domain in which the router is located.
Remote-table All remote stations with which NetBIOS information is to
exchanged must be entered in the remote-station table.
Group-list All workgroups known to NetBIOS are recorded in the group
list.
Host-list All computer names known to NetBIOS are recorded in the
host list.
Server-list All servers that have logged onto the network are recorded in
the server list.