Quick Start Guide

4
LANCOM 1681V
Power
VDSL
Online ETH 1
ETH 2 VPN ETH 3 ETH 4
ISDN Status
TECHNICAL DATA
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 111583/0117
Please observe the
following when setting
up the device
A Mount the device into
a 19” unit in a server
cabinet
A For devices to be
operated on the
desktop, please attach
the adhesive rubber
footpads
A Do not rest any objects
on top of the device
A Ensure that the
ventilation slots remain
unobstructed
Hardware
Power supply Internal power supply unit (110–230 V, 50-60 Hz), PoE based on IEEE 802.3at
Power consumption max. 444 watts
Environment Temperature range 0–40°C; humidity 10–90%; non-condensing
Housing Robust metal housing, 19“ 1U (442 x 44 x 211 mm > W x H x D) with removable mounting brackets,
network connectors on the front
Number of fans 2
Interfaces
ETH A 24 TP Ethernet ports 10/100/1000 Mbps
A 4 SFP/SFP+ ports 1/10 Gbps
A 28 concurrent Ethernet ports in total
Declaration of Conformity
The Declaration of Conformity can be found on the product page of our website www.lancom-systems.com
Package Content
Manual Quick Reference Guide (DE/EN), Installation Guide (DE/EN)
Mounting brackets Two 19” brackets for rackmounting
Cable IEC power cord, serial conguration cable 1.5 m
MOUNTING AND CONNECTING THE DEVICE
b
Power connector
Supply power to the device
via the power connector on
the back. Please use the IEC
power cable supplied.
d
SFP/SFP+ ports
Insert a suitable SFP module
(e.g. 10GBase-SX, 1000Base-
SX, or 1000Base-LX) into
the SFP port. Choose a cable
compatible with the SFP
module and connect it as
described in the module’s
documentation.
c
TP Ethernet ports
Connect one of the TP
Ethernet ports 1-24 via an
Ethernet cable to your end
device or another
LAN switch.
d SFP/SFP+ Ports
off Port inactive
blue Link 10 Gbps
green Link 1000 Mbps
b Mode Switch
Short press Port LED display switch
5 seconds pressed Restart of the device
10 seconds pressed Reset and restart of the device
c TP Ethernet Ports
off Port inactive
green Link 1000 Mbps
orange Link ≤ 100 Mbps
a
b c
LANCOM GS-2328P
Quick Reference Guide
SECURE. NETWORKS.
a System / Link/Act / Speed / PoE
System: off Device switched off
System: green Device operational
Link/Act: green Port LEDs show link / activity
Speed: green Port LEDs show link speed
PoE: green Port LEDs show PoE status
a
Serial connector
Connect the serial interface
(CONSOLE) via the included
serial conguration cable
to the serial interface of the
device you want to use for
conguring/monitoring the
switch.
d
Mode
Speed
Link/Act
System
LANCOM GS-2328P
PoE
SFP/SFP+
242322212019181716151413
121110987654321
CONSOLE
AC Line: 100-240V 50-60Hz
a b
dc
CONSOLE
AC Line: 100-240V 50-60Hz
Mode
Speed
Link/Act
System
LANCOM GS-2328P
PoE
SFP/SFP+
242322212019181716151413
121110987654321