Quick Start Guide

4
LANCOM 1681V
Power
VDSL
Online ETH 1
ETH 2 VPN ETH 3 ETH 4
ISDN Status
TECHNICAL DATA
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 111577/0117
Please observe the
following when setting
up the device
A Mount the device into
a 19” unit in a server
cabinet
A For devices to be
operated on the
desktop, please attach
the adhesive rubber
footpads
A Do not rest any objects
on top of the device
A Ensure that the
ventilation slots remain
unobstructed
Hardware
Power supply Internal power supply unit (110–230 V, 50-60 Hz), PoE based on IEEE 802.3af and IEEE 802.3at
Power consumption max. 160 watts
Environment Temperature range 0–40°C; humidity 10–90%; non-condensing
Housing Robust metal housing, 19“ 1U (220 x 45 x 242 mm > W x H x D) with removable mounting brackets,
network connectors on the front
Number of fans None; fanless design without rotating parts, high MTBF
Interfaces
ETH A 8 TP Ethernet-Ports 10/100/1000 Mbps
A 2 Combo-Ports (TP/SFP) 100/1000 Mbps (SFP) and 10/100/1000 Mbps (TP)
A 10 concurrent ports in total
Declaration of Conformity
The Declaration of Conformity can be found on the product page of our website www.lancom-systems.com
Package Content
Manual Quick Reference Guide (DE/EN), Installation Guide (DE/EN)
Mounting brackets Two 19” brackets for rackmounting
Cable IEC power cord, serial conguration cable 1.5 m
MOUNTING AND CONNECTING THE DEVICE
LANCOM GS-2310P+
Quick Reference Guide
SECURE. NETWORKS.
d SFP Ports
off Port inactive
green Link 1000 Mbps
orange Link ≤ 100 Mbps
c TP Ethernet Ports
off Port inactive
green Link 1000 Mbps
orange Link ≤ 100 Mbps
b Mode Switch
Short press Port LED display switch
5 seconds pressed Restart of the device
10 seconds pressed Reset and restart of the device
a System / Link/Act / Speed / PoE
System: off Device switched off
System: green Device operational
Link/Act/Speed: green Port LEDs show link / activity / speed
PoE: green Port LEDs show PoE status
ConsoleMode/Reset
PoE
Link/Act/Speed
System
a
b d
c
Power connector
Supply power to the
device via the power
connector on the back.
Please use the IEC
power cable supplied.
TP Ethernet ports
Connect one of the TP
Ethernet ports 1-10 via
an Ethernet cable to your
end device or another
LAN switch.
b
Serial connector
Connect the serial
interface (CONSOLE)
via the included serial
conguration cable to
the serial interface of the
device you want to use for
conguring/monitoring
the switch.
c d
SFP ports
Insert a suitable SFP
module (e.g. 1000Base-SX
or 1000Base-LX) into the
SFP port. Choose a cable
compatible with the SFP
module and connect it as
described in the module’s
documentation.
a
Ports 9 and 10 are combo ports. Either the TP- or the SFP port can be
used.
5
b c d
ConsoleMode/Reset
PoE
Link/Act/Speed
System
LANCOM GS-2310P+
ConsoleMode/Reset
PoE
Link/Act/Speed
System
LANCOM GS-2310P+
a