Operation Manual

ManualsBrandsLancom ManualsOtherES-2126 plus

110533/0710

LANCOM Systems GmbH

Adenauerstr. 20/B2

52146 Würselen

Germany

E-Mail: info@lancom.eu

Internet www.lancom.eu

LANCOM ES-2126+

LANCOM ES-2126P+

...connecting your business

110533_LC-ES2126-MANUAL_cover.in1 1110533_LC-ES2126-MANUAL_cover.in1 1 05.07.2010 12:47:3605.07.2010 12:47:36

Summary of content (270 pages)

PAGE 1
LANCOM Systems GmbH Adenauerstr. 20/B2 52146 Würselen Germany E-Mail: info@lancom.eu Internet www.lancom.eu . . . c o n n e c t i n g y o u r b u s i n e s s 110533/0710 LANCOM ES-2126+ LANCOM ES-2126P+ 110533_LC-ES2126-MANUAL_cover.in1 1 05.07.
PAGE 2
LANCOM ES-2126+ LANCOM ES-2126P+
PAGE 3
© 2010 LANCOM Systems GmbH, Wuerselen (Germany). All rights reserved. While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. LANCOM Systems shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from LANCOM Systems.
PAGE 4
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Preface Preface Thank you for your confidence in us! The LANCOM ES-2126+ switch features 24 Fast-Ethernet and two combo ports (TP/SFP), it integrates perfectly into LANCOM's Advanced Routing und Forwarding and it supports up to 256 active VLANs. It uses bandwidth control to prioritize the data traffic according to predefined criteria (e.g. voice data or certain ports). Furthermore the LANCOM ES-2126P+ switch supports Power-over-Ethernet for connected network devices.
PAGE 5
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Preface EN manual, or if you require any further support. The area 'Support' will help you with many answers to frequently asked questions (FAQs). Furthermore, the knowledgebase offers you a large reserve of information. The latest drivers, firmware, utilities and documentation are constantly available for download. In addition, LANCOM Support is available.
PAGE 6
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Contents Contents 1.1 Key Features in the Device 1.2 Just what can your LANCOM switch do? 2 Installation 2.1 Package content 9 9 12 14 14 2.2 System requirements 14 2.3 Status displays and interfaces 2.3.1 LEDs and buttons on the LANCOM ES-2126+ 2.3.2 LEDs and buttons on the LANCOM ES-2126P+ 2.3.3 Connectors on the LANCOM ES-2126+ and LANCOM ES-2126P+ 15 15 16 2.4 Mounting and connecting up the LANCOM switch 18 2.5 Software installation 2.5.
PAGE 7
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Contents 4 Operation of Web- based Management 30 4.1 Web Management Home Overview 31 4.2 System 4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 4.2.6 4.2.7 System Information IP Configuration Time Configuration Account Configuration Management Security Virtual Stack Login Protect 33 33 34 36 39 40 43 44 4.3 Port 4.3.1 4.3.2 4.3.3 4.3.4 4.3.5 4.3.6 Status Port Configuration Description Simple Counter Detail Counter PoE 45 45 49 50 51 52 54 4.4 Loop Detection 57 4.
PAGE 8
LANCOM ES-2126+ and LANCOM ES-2126P+ 4.9.3 Static Setting 4.9.4 MAC Alias 4.9.5 Port Security 4.9.6 Port Static MAC 4.9.7 GVRP 4.9.8 Config 4.9.9 Counter 4.9.10 Group 78 79 80 80 82 83 84 86 4.10 STP 4.10.1 Status 4.10.2 Configuration 4.10.3 Port 86 86 88 90 4.11 Trunk 4.11.1 Port Setting/Status 4.11.2 Aggregator View 4.11.3 LACP System Configuration 92 94 95 96 4.12 802.1x Configuration 97 4.13 TACACS+ 4.13.1 Introduction 4.13.2 State 4.13.3 Authentication 4.13.4 Authorization 4.13.
PAGE 9
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Contents EN 4.18.2 4.18.3 4.18.4 4.18.5 4.18.6 4.18.7 4.18.8 VIP Port Setting 802.1p Setting D-Type TOS T-Type TOS R-Type TOS M-Type TOS DSCP Setting 4.19 Diagnostics 4.19.1 Diag 4.19.2 Loopback 4.19.3 Ping 4.19.4 Watchdog 128 128 129 130 130 4.20 TFTP Server 131 4.21 Log 132 4.22 Firmware Upgrade 133 4.23 Reboot 134 4.24 Logout 135 5 Operation of CLI Management (englisch) 136 5.1 CLI Management 5.1.1 Login 136 136 5.2 Commands of CLI 5.2.
PAGE 10
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 1: Introduction 1 Introduction The switch can be managed through RS-232 serial port via directly connection, or through Ethernet port using Telnet or WEBconfig. Additionally, the switches can be managed via SSH (Secure Shell) or WEBconfig with SSLencryption. With the SNMP agent, the network administrator can logon the switch to monitor, configure and control each port’s activity in a friendly way.
PAGE 11
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 1: Introduction Robin (WRR). User-defined weight classification of packet priority can be based on either VLAN tag on packets or user-defined port priority. 쮿 Spanning Tree: Support IEEE 802.1D, IEEE 802.1w (RSTP: Rapid Spanning Tree Protocol) standards. EN 쮿 VLAN: Support Port-based VLAN and IEEE802.1Q Tag VLAN. Support 256 active VLANs and VLAN ID 1~4094. 쮿 Port Trunking: Support static port trunking and port trunking with IEEE 802.3ad LACP.
PAGE 12
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 1: Introduction EN member ports, and, in nature, avoid wasting the bandwidth while IP multicast packets are running over the network.
PAGE 13
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 1: Introduction 1.2 Just what can your LANCOM switch do? LANCOM ES2126+ LANCOM ES2126P+ EN Hardware Supports 24-port 10/100M TP ports with Nway and auto MDIX function ✔ ✔ 2 Gigabit dual media ports(TP/SFP) ✔ ✔ On-line pluggable fiber transceiver modules ✔ ✔ 256KB packet buffer and 128KB control memory ✔ ✔ Maximal packet length can be up to 1536 bytes ✔ ✔ Full-duplex flow control (IEEE802.
PAGE 14
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 1: Introduction LANCOM ES2126P+ 5 kinds of QoS, are as follows, MAC Priority, 802.1p Priority, IP TOS Priority, and DiffServ DSCP Priority. ✔ ✔ WEBconfig and CLI management over telnet ✔ ✔ WEBconfig with optional SSL-encryption and CLI management over SSH ✔ ✔ Rapid Spanning Tree (802.1w RSTP) ✔ ✔ 802.
PAGE 15
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 2: Installation 2 Installation This chapter will assist you to quickly install hardware and software. First, check the package contents and system requirements. The device can be installed and configured quickly and easily if all prerequisites are fulfilled. EN 2.1 Package content Before beginning with the installation, please check that nothing is missing from your package.
PAGE 16
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 2: Installation 2.3 Status displays and interfaces Meanings of the LEDs  2.3.1 Please be aware that LANmonitor shows far more information about the status of the LANCOM switch than the LEDs '→ Monitoring the LANCOM switch with LANmonitor'. LEDs and buttons on the LANCOM ES-2126+ Located on the front of the device are light-emitting diodes (LEDs) that provide information on device status, and also two buttons.
PAGE 17
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 2: Installation Power LED: Constant green when power is supplied to the device. 쐏 ACT Constant green when the LED mode is set to "Active". 쐄 FDX Constant green when the LED mode is set to "Full-Duplex". 쐂 SPD Constant green when the LED mode is set to "Speed". 쐆 LEDSET Button to switch the LEDmode between -“Active”, “Full-Duplex” and “Speed”. 쐊 LINK Constant green when the network connection is established to the connected device.
PAGE 18
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 2: Installation EN + 쐃 쐋 쐏 쐇 쐈 쐊 쐎 쐅 쐈 쐃 CPU RUN Blinks green if the CPU is running without problem. 쐇 PWR Power LED: Constant green when power is supplied to the device. 쐋 PoE-ACT Constant green when the device connected to this port is powered via PoE. 쐏 LINK Constant green when the network connection is established to the connected device. Off if no network connection can be established to the connected device.
PAGE 19
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 2: Installation 쐆 FDX Constant green when the LED mode is set to "Full-Duplex". 쐊 SPD Constant green when the LED mode is set to "Speed". 쐎 LEDSET Button to switch the LEDmode between -“Active”, “Full-Duplex” and “Speed”. 쐅 Reset Button to re-start the system. 쐈 FX Constant green when the optical port is active. Off when the TP port is active. EN Port 25 and 26 2.3.
PAGE 20
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 2: Installation If optical connections are to be used, additional modules can be purchased as accessories. 햴 Configuration via serial ports – In order to configure the LANCOM switch directly, connect the serial configuration cable (supplied) to the COM port of the device. Connect the other end of this cable to an available COM port (RS 232) on a PC.
PAGE 21
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 2: Installation EN In Setup, select Install software. The following selection menus will appear on screen: 2.5.2 Which software should I install? 쮿 LANconfig is the Windows configuration program for all LANCOM devices. LANconfig searches for all LANCOM devices in your network. You can use this to start the Web-based configuration of a LANCOM switch. 쮿 With LANmonitor you can use a Windows computer to monitor all of your LANCOM devices.
PAGE 22
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 3: Configuring and monitoring the LANCOM switch 3 Configuring and monitoring the LANCOM switch 3.1 Configuration options 쮿 By means of a graphical user interface or via a browser (WEBconfig). This option is only available if you have network access to the device's IP address from your computer. You can access WEBconfig via a encrypted connection over SSL as well.
PAGE 23
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 3: Configuring and monitoring the LANCOM switch EN 쮿 If you do not have the device's IP number, LANconfig can be used to search for it. To start LANconfig click on Start 왘 Programs 왘 LANCOM 왘 LANconfig. LANconfig automatically searches for all available devices in your network. Any available LANCOM devices will be displayed in the list, including the LANCOM switch. Double-click on this entry to start the browser automatically with the correct IP address.
PAGE 24
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 3: Configuring and monitoring the LANCOM switch 3.1.2 Starting the Command Line Interface over the network If you know the device's IP address (see section above) and the LANCOM switch is accessible from your computer via the network, the you can use the command line interface via the network. 쐃 To do this, start a console such as Telnet and enter the device's IP address as the target. 3.1.3 EN 쐇 Log on with user name and password (default: admin, admin).
PAGE 25
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 3: Configuring and monitoring the LANCOM switch 쐋 Log on with user name and password (default: admin, admin). 3.2 Which configuration does the device use? The switch supports four different configurations: The start configuration, the current working configuration, the user configuration and the default configuration.
PAGE 26
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 3: Configuring and monitoring the LANCOM switch 왏 With the function "restore default configuration included default IP address" you can reset the switch to the factory default settings (including the administrator´s password and the auto DHCP setting). 왏 With the function “restore default configuration without changing current IP address” you can reset the switch to the factory default settings, but without changing the IP address.
PAGE 27
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 3: Configuring and monitoring the LANCOM switch EN Here you can save the current configuration to the flash memory as a user configuration. 쮿 Restore default configuration (includes default IP address) Here you can reset the switch to its factory settings. The default configuration replaces the start configuration. The device is reset to Auto DHCP and it retrieves its IP address from a DHCP server in the network.
PAGE 28
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 3: Configuring and monitoring the LANCOM switch 왏 Export file path: Export start: You can export the start configuration from the flash memory. 왏 Import file path: Import start: You can import the start configuration to the flash memory here. Import user conf.: You can import the user configuration to the flash memory here. 3.
PAGE 29
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 3: Configuring and monitoring the LANCOM switch 쮿 The left icon shows the config state: 왏 Gray: The port is deactivated in the configuration 왏 Yellow: The port is activated in the configuration 쮿 The right-hand icon shows the link state: 왏 Gray: No active network device is connected to the port 왏 Green: A network device is connected to the port and active EN Apart from the status, LANmonitor displays the VLAN ID for each port and the detected data rate at act
PAGE 30
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 3: Configuring and monitoring the LANCOM switch PoE class Use Power range 0 default 0,44 W - 12.95 W 1 optional 0,44 W - 3.84 W 2 optional 3,84 W - 6.49 W 3 optional 6,49 W - 12.95 W 4 reserved 15,4 W EN Along with PoE status, LANmonitor also shows the PoE class as detected for the powered devices. When a Powerded Device (PD) is connected, the Power Source Equipment (PSE) measures the power requirement of the device.
PAGE 31
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 4 Operation of Web-based Management EN This chapter instructs you how to configure and manage the switch through the web user interface it supports, to access and manage the 24 10/100Mbps TP + 2 Gigabit dual media ports with TP/SFP Fiber management Ethernet switch.
PAGE 32
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management trator’s identity, can only monitor the system. For those who have no administrator’s identity, can only monitor the system. There are only a maximum of three users able to login simultaneously in the switch. To optimize the display effect, we recommend you use Microsoft IE 6.0 above or current FireFox and have the resolution 1024x768. The switch supported neutral web browser interface.
PAGE 33
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN In this device, there are clicking functions on the panel provided for the information of the ports. These are very convenient functions for browsing the information of a single port. When clicking the port on the front panel, an information window for the port will be pop out. The figure shows the basic information of the clicked port.
PAGE 34
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 4.2 4.2.1 System System Information 쮿 Function name: System Information 쮿 Function Description: Shows the basic system information. 쮿 Parameter Description: 왏 Model name: The model name of this device.
PAGE 35
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 왏 System Description: As it is, this tells what this device is. Here, it is “24-Port 10/100BaseT/TX Managed PoE Switch”. 왏 Location: Basically, it is the location where this switch is put. Userdefined. 왏 Contact: For easily managing and maintaining device, you may write down the contact person and phone here for getting help soon. You can configure this parameter through the device’s user interface or SNMP.
PAGE 36
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Function name: IP Configuration 쮿 Function Description: Set IP address, subnet mask, default gateway and DNS for the switch. 쮿 Parameter Description: 왏 DHCP Setting: DHCP is the abbreviation of Dynamic Host Configuration Protocol. Here DHCP means a switch to turn ON or OFF the function. The switch supports DHCP client used to get an IP address automatically if you set this function “Enable”.
PAGE 37
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN networks, hence, subnet mask is introduced to solve this problem. Subnet mask uses some bits from host address and makes an IP address looked Network address, Subnet mask number and host address.
PAGE 38
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 쮿 Function name: Time 쮿 Function Description: Set the system time by manual input or set it by syncing from Time servers. The function also supports daylight saving for different area’s time adjustment. 쮿 Parameter Description: 왏 Current Time: Shows the current time of the system. 왏 Manual: This is the function to adjust the time manually.
PAGE 39
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN time since it passed over. And when the time passes over the ending time, the system time will be decreased one hour after one minute at the time since it passed over. The switch supports valid configurable day light saving time is –5 ~ +5 step one hour. The zero for this parameter means it need not have to adjust current time, equivalent to in-act daylight saving.
PAGE 40
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management Hour: Range is 0 ~ 23. EN Default: 0 4.2.4 Account Configuration In this function, only administrator can create, modify or delete the username and password. Administrator can modify other guest identities’ password without confirming the password but it is necessary to modify the administratorequivalent identity. Guest-equivalent identity can modify his password only.
PAGE 41
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 쮿 Password: guest 4.2.5 Management Security Through the management security configuration, the manager can do the strict setup to control the switch and limit the user to access this switch. The following rules are offered for the manager to manage the switch: 쐃 When no lists exists, then it will accept all connections.
PAGE 42
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 쐏 When both “accept and deny” lists exist, then it will deny all connections, excluding the connection inside of the accepting range. 쐄 When both “accept and deny” lists exist, then it will deny all connections, excluding the connection inside of the accepting range and NOT inside of the denying range at the same time.
PAGE 43
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter Description: 왏 Name: A name is composed of any letter (A-Z, a-z) and digit (0-9) with maximal 8 characters. 왏 VID: The switch supports two kinds of options for managed valid VLAN VID, including “Any” and “Custom”. Default is “Any”. When you choose “Custom”, you can fill in VID number. The valid VID range is 1~4094.
PAGE 44
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management and then press button. Of course, the existed entry also can be modified by pressing this button. 왏 Delete: Remove the existed entry of Management Security Configuration from the management security table. Virtual Stack 쮿 Function name: Virtual Stack 쮿 Function Description: Virtual Stack Management(VSM) is the group management function.
PAGE 45
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter Description: 왏 State: It is used for the activation or de-activation of VSM. Default is Enable. 왏 Role: The role that the switch would like to play in virtual stack. Two types of roles, including master and slave are offered for option. Default is Master. 왏 Group ID: It is the group identifier (GID) which signs for VSM. Valid letters are A-Z, a-z, 0-9, “ - “ and “_” characters.
PAGE 46
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Lock-Minutes: Time in Minutes, for which the device blocks all logins after the maximum number of login errors is achieved. Possible Values: 0 - 10, 0 disables login protect 4.3 EN Default: 3 Port Four functions, including Port Status, Port Configuration, Simple Counter and Detail Counter are contained in this function folder for port monitor and management.
PAGE 47
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management will be automatically refreshed the port current status about every 5 seconds. EN 쮿 Parameter: 왏 Port No: Display the port number. The number is 1 – 26. Both port 25 and 26 are optional modules. 왏 Media: Show the media type adopted in all ports. The Port 25 and Port 26 are optional modules, which support either fiber or UTP media with either Gigabit Ethernet (1000Mbps) or 10/100Mbps Fast Ethernet port.
PAGE 48
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management In port 25 and port 26, if the media is 1000Mbps with TP media, it will show the combinations of 10/100M and Full/Half duplex, 1000Mbps and Full duplex only. If the media is 1000Mbps with fiber media, it will show only 1000M/Full duplex. Default: None, depends on the result of the negotiation. 왏 Rx Pause: The way that the port adopts to process the PAUSE frame.
PAGE 49
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Fiber Type: Displays the fiber mode, for instance, Multi-Mode, Single-Mode. 왏 Tx Central Wavelength: Displays the fiber optical transmitting central wavelength, for instance, 850nm, 1310nm, 1550nm and so on. EN 왏 Baud Rate: Displays the maximum baud rate of the fiber module supported, for instance, 10M, 100M, 1G and so on. 왏 Vendor OUI: Displays the Manufacturer's OUI code which is assigned by IEEE.
PAGE 50
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management Port Configuration Port Configuration is applied to change the setting of each port. In this configuration function, you can set/reset the following functions. All of them are described in detail below. EN 4.3.2 Port Configuration It is used to set each port’s operation mode. The switch supports 3 parameters for each port. They are State, Speed/Duplex and Flow Control.
PAGE 51
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management Media type NWay Speed Duplex ON/OFF 10/100M Full/Half 1000M TP ON/OFF 10/100/1000M Full for all, Half for 10/100 1000M Fiber ON/OFF 1000M Full EN 100M TP In Auto-negotiation mode, no default value. In Forced mode, default value depends on your setting. 왏 Flow Control: There are two modes to choose in flow control, including Symmetric and Asymmetric.
PAGE 52
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter: 왏 Port: Number of the port. 왏 Description: Field to enter a port’s description. EN Possible Values: alpha numeric characters Default: empty 4.3.4 Simple Counter The function of Simple Counter collects any information and provides the counting about the traffic of the port, no matter the packet is good or bad. In the following figure, the window can show all ports’ counter information at the same time.
PAGE 53
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 왏 왏 왏 왏 EN 4.3.5 Rx Byte: Total received bytes. Tx Packet: The counting number of the packet transmitted. Rx Packet: The counting number of the packet received. Tx Collision: Number of collisions transmitting frames experienced. Rx Error Packet: Number of bad packets received.
PAGE 54
LANCOM ES-2126+ and LANCOM ES-2126P+ 왏 Rx Octets: Total received bytes. 왏 Rx Errors: Number of bad packets received. 왏 Rx Unicast Packets: Show the counting number of the received unicast packet. 왏 Rx Broadcast Packets: Show the counting number of the received broadcast packet. 왏 Rx Multicast Packets: Show the counting number of the received multicast packet. 왏 Rx Pause Packets: Show the counting number of the received pause packet. 왏 Tx Collisions: Number of collisions transmitting frames experienced.
PAGE 55
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 왏 TX Octets: Total transmitted bytes. 왏 Tx Unicast Packets: Show the counting number of the transmitted unicast packet. 왏 Tx Broadcast Packets: Show the counting number of the transmitted broadcast packet. 왏 Tx Multicast Packets: Show the counting number of the transmitted multicast packet. 왏 Tx Pause Packets: Show the counting number of the transmitted pause packet. 왏 Rx FCS Errors: Number of bad FSC packets received.
PAGE 56
LANCOM ES-2126+ and LANCOM ES-2126P+ 왏 왏 왏 왏 왏 왏 왏 왏 왏 왏 왏 왏 왏 Vmain: The volt is supplied by the PoE. Imain: The sum of the current that every port supplies. Pconsume: The sum of the power that every port supplies. Power Limit: The maximal power that the switch can supply (Read Only). Temperature: The temperature of the chip on PoE. Port No: Port number. Port On: Shows whether the port is supplying the power to the PD or not. AC Disconnect Port Off: Port is turned off due to the AC Disconnect function.
PAGE 57
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN once the power required by the PD excesses the Class, Short Circuit or over temperature occurs. 쮿 Parameter: 왏 Status: Include “Normal” or “Active” two kinds of status. The former means the port is ready to link and supply the power to the PD at any time. The latter means the port is in the condition of supplying the power.
PAGE 58
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Class: The Class of the PD linked to the port of the switch. Loop Detection The loop detection is used to detect the presence of traffic. When switch receives packet's(looping detection frame) MAC address the same as oneself from port, show Loop detection happens. The port will be locked when it received the looping detection frames.
PAGE 59
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management Basically, it is passive except issuing the trap information. The switch supports a switch to turn on or off the SNMP agent. If you set the field SNMP “Enable”, SNMP agent will be started up. All supported MIB OIDs, including RMON MIB, can be accessed via SNMP manager.
PAGE 60
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management Default trap host IP address: 0.0.0.0 왏 Trap: In the switch, there are 6 trap hosts supported. Each of them has its own community name and IP address; is user-definable. To set up a trap host means to create a trap manager by assigning an IP address to host the trap message.
PAGE 61
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management power and then reboot and recover. At this moment, a bunch of switch or other network device on the LAN will try its best to find the server to get the services or try to set up the predefined links, they will issue many broadcast packets in the network. EN The switch supports a random delay time for DHCP and boot delay for each device.
PAGE 62
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN The packets will be discarded by the IGMP Snooping if the user transmits multicast packets to the multicast group that had not been built up in advance. 4.7.1 IGMP Snooping Status IGMP is used to snoop the status of IP multicast groups and display its associated information in both tagged VLAN and non-tagged VLAN networks.
PAGE 63
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 VLAN ID: Shows VLAN ID for each multicast group. 왏 Member Port: Shows member ports that join each multicast group. Member port may be only or more than one. 4.7.2 Allowed Group EN The Allowed Group function allows the IGMP Snooping to set up the IP multicast table based on user’s specific conditions. IGMP report packets that meet the items you set up will be joined or formed the multicast group.
PAGE 64
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Edit: The existed entry also can be modified after pressing button. 왏 Delete: Remove the existed entry of allowed group configuration from the allowed group. Static IP Multicast Here you can define mac table entries manually, which the device cannot learn automatically, for example. 쮿 Parameter: 왏 IP Adress: The ip address of the manually defined multicast group.
PAGE 65
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN For LANCOM ES2126+ only 쮿 Parameter: 왏 Port: For this port the group limit is activated. 왏 Group Limit: Maximum number of groups which may use the port. Possible Values: 0 to 256. Default: 256. 4.7.5 Client Information This function displays information about the client connected to the device's port. Mark the port with the relevant client and click on 'Search'.
PAGE 66
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Index: Shows the index of the client. 왏 Port: Shows the port, which is connected to the client. 왏 MAC Address: Shows the mac address of the client. 4.7.6 EN 왏 Multicast Address: Shows the multicast address of the client. MVR Configuration Multicast VLAN Registration (MVR) enables multicast data streams to be transmitted between a sender VLAN and multiple receiver VLANs.
PAGE 67
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Apply: Applies the settings to the switch. 왏 Index: Index of the allowed group. 왏 Begin Address: Start address of the allowed group. EN 왏 End Address: End address of the allowed group. 왏 Add: Adds an entry to the allowed groups. 왏 Delete: Deletes an entry from the allowed groups. 왏 Edit: Edits an entry of the allowed groups. 4.7.7 MVR Group Status Here you can look up the MVR group memberships.
PAGE 68
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management RADIUS IGMP Here you can configure the parameters for the igmp authentication via RADIUS server. EN 4.7.8 쮿 Parameter: 왏 Radius Server: Ip address of the RADIUS authentication server. Default: 192.168.1.1 왏 Port-Number: Select the port, via which the device communicates with the authentication server.
PAGE 69
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Number of Retry: The maximum number of times that the authenticator forwards requests from the authentication server to the supplicant, before the authentication process is aborted. Possible values: numerical characters Default: 1 EN 왏 Secret Key: The password which encrypts the communication between the authenticator and the authentication server.
PAGE 70
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management filtering list or egress filtering list, the packet will be screened with more filtering criteria to determine if it can be forwarded. The switch supports supplement of 802.1q.. Port-based: Port-based VLAN is defined by port. Any packet coming in or outgoing from any one port of a port-based VLAN will be accepted. No filtering criterion applies in port-based VLAN. The only criterion is the physical port you connect to.
PAGE 71
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN be forwarded as Tag-based VLAN. So, the incoming packets with tag will become the double-tag ones. 4.8.2 Tag-based Group 쮿 Function name: Tag-based Group Configuration 쮿 Function Description: It shows the information of existed Tag-based VLAN Groups. You can also easily create, edit and delete a Tag-based VLAN group by pressing , and function buttons.
PAGE 72
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 왏 Member: This is used to enable or disable if a port is a member of the new added VLAN, “Enable” means it is a member of the VLAN. Just tick the check box beside the port x to enable it. Add Group: Input the VLAN name, VID and then choose the member by ticking the check box beside the port No. to create a new Tag-based VLAN. As to the parameter of Untag, it stands for an egress rule of the port.
PAGE 73
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 왏 Delete Group: Just press the button to remove the selected group entry from the Tag-based group table. 왏 Edit a group: ust select a group entry and press the button, then you can modify a group’s description, member and untag settings. 4.8.
PAGE 74
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 쮿 Function Description: In PVID Setting, user can input VID number to each port. The range of VID number is from 1 to 4094. User also can choose ingress filtering rule (Rule 2) to each port. The Ingress Filtering Rule 2 is “drop untagged frame”. While Rule 2 is enabled, the port will discard all Untagged-frames. 쮿 Parameter Description: 왏 Port 1-26: Port number. 왏 PVID: This PVID range will be 1-4094.
PAGE 75
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management will be processed. If the later is the case, only the packets carrying VLAN tag will be processed, the rest packets will be discarded. 4.8.4 Port-based Group EN 쮿 Function name: Port-based Group Configuration 쮿 Function Description: It shows the information of the existed Port-based VLAN Groups. You can easily create, edit and delete a Port-based VLAN group by pressing , and function buttons.
PAGE 76
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 왏 Delete Group: Just press the button to remove the selected group entry from the Port-based group table. 왏 Edit a group: Just select a group entry and press the button, then you can modify a group‘s description and member set. 4.8.5 Management VLAN Here you can configure the settings for the port-based VLAN.
PAGE 77
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 State: Enables or disables port-based VLAN. 왏 VID: VLAN identifier for the port-based VLAN. EN 4.9 MAC Table MAC Table Configuration gathers many functions, including MAC Table Information, MAC Table Maintenance, Static and MAC Alias, which cannot be categorized to some function type. They are described below. 4.9.
PAGE 78
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 왏 State: Display the method that this MAC Entry is built. It may show “Dynamic MAC” or “Static MAC”. 4.9.2 MAC Table Maintenance 쮿 This function can allow the user to set up the processing mechanism of MAC Table. An idle MAC address exceeding MAC Address Age-out Time will be removed from the MAC Table.
PAGE 79
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 8191. As to port 25~port 26, only the fixed value “8192” is assigned to these two ports and user cannot configure this value. 4.9.3 Static Setting 쮿 The function of Static is used to configure MAC’s real manners inside of the switch. Three kinds of manners including static, static with destination drop and static with source drop are contained in this function .
PAGE 80
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Parameter: 왏 MAC: It is a six-byte long Ethernet hardware address and usually expressed by hex and separated by hyphens. For example, 왏 00 – 40 - C7 - D6 – 00 - 01 왏 VID: VLAN identifier. This will be filled only when tagged VLAN is applied. Valid range is 1 ~ 4094. 왏 Queue (Priority): Set up the priority( 0~3) for the MAC.
PAGE 81
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN As to MAC Alias Delete function is used to let you remove an alias name to a MAC address. You can select an existed MAC address or alias name to remove. 쮿 Parameter Description: 왏 MAC Address:It is a six-byte long Ethernet hardware address and usually expressed by hex and separated by hyphens. For example, 00 – 40 - C7 - D6 – 00 - 02 왏 Alias: MAC alias name you assign.
PAGE 82
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN port are able to access this if Port Security is active. If there are no MAC addresses entered into the list for a port, then all addresses in the MAC table can access it. 쮿 Parameter: 왏 No: Number of the port, which the mac address may use. 왏 MAC: Mac address, which may use a port. Possible values: 12 alpha numeric characters 왏 VID: VLAN identifier, which is active if the device uses tagged VLAN.
PAGE 83
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Delete: Deletes a mac address from a port’s list. 4.9.7 GVRP EN GVRP is an application based on Generic Attribute Registration Protocol (GARP), mainly used to automatically and dynamically maintain the group membership information of the VLANs. The GVRP offers the function providing the VLAN registration service through a GARP application.
PAGE 84
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management Config GVRP Config In the function of GVRP Config, it is used to configure each port’s GVRP operation mode, in which there are seven parameters needed to be configured described below. 쮿 Parameter Description: 왏 GVRP State Setting: This function is simply to let you enable or disable GVRP function. You can pull down the list and click the arrow key to choose “Enable” or “Disable”.
PAGE 85
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management value, normal registrar, fixed registrar and forbidden registrar, provided for the user’s choice. Normal:It is Normal Registration. The Registrar responds normally to incoming GARP messages. The default setting is Normal. Fixed: It is Registration Fixed. The Registrar ignores all GARP messages, and all members remain in the registered (IN) state. EN Forbidden: It is Registration Forbidden.
PAGE 86
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Received: Total GVRP Packets: Total GVRP BPDU is received by the GVRP application. LeaveAll Message Packets: Number of GARP BPDU with Leave All message is received by the GARP application. JoinEmpty Message Packets: Number of GARP BPDU with Join Empty message is received by the GARP application. JoinIn Message Packets: Number of GARP BPDU with Join In message is received by the GARP application.
PAGE 87
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 4.9.10 Group GVRP Group Information To show the dynamic group member and their information. EN 쮿 Parameter Description: 왏 Current Dynamic Group Number: The number of GVRP group that are created currently. 왏 VID: VLAN identifier. When GVRP group creates, each dynamic VLAN group owns its VID. Valid range is 1 ~ 4094. 왏 Member Port: Those are the members belonging to the same dynamic VLAN group.
PAGE 88
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Parameter Description: 왏 STP State: Show the current STP Enabled / Disabled status. Default is “Disabled”. 왏 Bridge ID: Show switch’s bridge ID which stands for the MAC address of this switch. 왏 Bridge Priority: Show this switch’s current bridge priority setting. Default is 32768. 왏 Designated Root: Show root bridge ID of this network segment. If this switch is a root bridge, the “Designated Root” will show this switch’s bridge ID.
PAGE 89
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 0. The figures showing in the screen may not be the exact time it spent but very close to, because the time is eclipsing. 왏 Time Since Last Topology Change: Time Since Last Topology Change is the accumulated time in unit of seconds the STP has been since the last STP Topology Change was made. When Topology Change is initiated again, this counter will be reset to 0.
PAGE 90
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Max. Age: When the switch is the root bridge, the whole LAN will apply this figure set by this switch as their maximum age time. When a bridge received a BPDU originated from the root bridge and if the message age conveyed in the BPDU exceeds the Max. Age of the root bridge, the bridge will treat the root bridge malfunctioned and issue a Topology Change Notification (TCN) BPDU to all other bridges.
PAGE 91
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 4.10.3 Port 쮿 Function name: STP Port Setting 쮿 Function Description: In the STP Port Setting, one item selection and five parameters settings are offered for user’s setup. User can disable and enable each port by selecting each Port Status item. User also can set “Path Cost” and “Priority” of each port by filling in the desired value and set “Admin Edge Port” and “Admin Point To Point” by selecting the desired item.
PAGE 92
LANCOM ES-2126+ and LANCOM ES-2126P+ Bridge by calculating the sum of path cost contributed by all ports on this path. A port with a smaller path cost value would become the Root Port more possibly. 왏 Configured Path Cost: The range is 0 – 200,000,000. In the switch, if path cost is set to be zero, the STP will get the recommended value resulted from auto-negotiation of the link accordingly and display this value in the field of Path Cost Status.
PAGE 93
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management Auto, it means RSTP will use the duplex mode resulted from the autonegotiation. In today’s switched networks, most links are running in full-duplex mode. For sure, the result may be half-duplex, in this case, the port will not fast transit to Forwarding state. If it is set as True, the port is treated as point-to-point link by RSTP and unconditionally transited to Forwarding state.
PAGE 94
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management if there are three Fast Ethernet ports aggregated in a logical port, then this logical port has bandwidth three times as high as a single Fast Ethernet port has. The switch supports two kinds of port trunking methods: Ports using Link Aggregation Control Protocol (according to IEEE 802.3ad specification) as their trunking method can choose their unique LACP GroupID (1~3) to form a logic “trunked port”.
PAGE 95
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management Per Trunking Group supports a maximum of 4 ready member-ports. Please note that some decisions will automatically be made by the system while you are configuring your trunking ports.
PAGE 96
LANCOM ES-2126+ and LANCOM ES-2126P+ 왏 Aggtr: Aggtr is an abbreviation of “aggregator”. Every port is also an aggregator, and its own aggregator ID is the same as its own Port No. We can regard an aggregator as a representative of a trunking group. Ports with same Group ID and using same trunking method will have the opportunity to aggregate to a particular aggregator port. This aggregator port is usually the port with the smallest Port No. within the trunking group.
PAGE 97
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 왏 Ready Ports: Show only the ready member ports within an aggregator (port). 4.11.3 LACP System Configuration Show the detailed information of the LACP trunking group. 쮿 Parameter Description: 왏 Actor: The switch you are watching on. 왏 Partner: The peer system from this aggregator’s view. 왏 System Priority: Show the System Priority part of a system ID. 왏 MAC Address: Show the MAC Address part of a system ID.
PAGE 98
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Function Description: It is used to set the priority part of the LACP system ID. LACP will only aggregate together the ports whose peer link partners are all on a single system. Each system supports LACP will be assigned a globally unique System Identifier for this purpose. A system ID is a 64-bit field comprising a 48-bit MAC Address and 16-bit priority value. 쮿 Parameter Description: 왏 System Priority: The System Priority can be set by the user.
PAGE 99
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management It is an entity being authenticated by an authenticator. It is used to communicate with the Authenticator PAE (Port Access Entity) by exchanging the authentication message when the Authenticator PAE request to it. Authenticator: EN An entity facilitates the authentication of the supplicant entity.
PAGE 100
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management In this figure is the typical configuration, a single supplicant, an authenticator and an authentication server. B and C is in the internal network, D is Authentication server running RADIUS, switch at the central location acts Authenticator connecting to PC A and A is a PC outside the controlled port, running Supplicant PAE.
PAGE 101
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management The figure shows the procedure of 802.1x authentication. There are steps for the login based on 802.1x port access control management. The protocol used in the right side is EAPOL and the left side is EAP. 쐃 At the initial stage, the supplicant A is unauthenticated and a port on switch acting as an authenticator is in unauthorized state. So the access is blocked in this stage. EN 쐇 Initiating a session.
PAGE 102
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 쐅 When the supplicant issue an EAP-Logoff message to Authentication server, the port you are using is set to be unauthorized. Only MultiHost 802.1X is the type of authentication supported in the switch. In this mode, for the devices connected to this port, once a supplicant is authorized, the devices connected to this port can access the network resource through this port. 802.
PAGE 103
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN Port Mode Port Control Authentication Port Status Disable Don’t Care Don’t Care Port Uncontrolled Multihost Auto Successful Port Authorized Multihost Auto Failure Port Unauthorized Multihost ForceUnauthorized Don’t Care Port Unauthorized Multihost ForceAuthorized Don’t Care Port Authorized Table 3-3 802.
PAGE 104
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 802.1x Mode Setting 쮿 Parameter Description: 왏 Port Number: Indicate which port is selected to configure the 802.1x operation mode. 왏 802.1x Mode: 802.1x operation mode. There are two options, including Disable and Multi-host mode. Default is Disable. Disable: It will have the chosen port acting as a plain port, that is no 802.1x port access control works on the port. 802.
PAGE 105
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management Port Security Management Shows each port status. In Multihost mode, it shows the port number and its status, authorized or unauthorized. EN 쮿 Parameter Description: 왏 Disable Mode: When selecting Disable mode for a port in the function 802.1X Port Mode Configuration, the port is in the uncontrolled port state and does not apply 802.1X authenticator on it.
PAGE 106
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN the port is granted to access the network, the port status is authorized, otherwise, unauthorized. Param. Setting 쮿 Function Description: This function is used to configure the parameters for each port in 802.1x port security application. Refer to the following parameters description for details. 쮿 Parameter Description: 왏 Port: It is the port number to be selected for configuring its associated 802.
PAGE 107
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Port Control: This is used to set the operation mode of authorization. There are three type of operation mode supported, ForceUnauthorized, ForceAuthorized, Auto. ForceUnauthorized: The controlled port is forced to hold in the unauthorized state. ForceAuthorized: EN The controlled port is forced to hold in the authorized state.
PAGE 108
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management Default: 30 seconds. EN 왏 serverTimeout(1-65535 s): A timeout condition in the exchange between the authenticator and the authentication server. The valid range: 1 –65535. Default: 30 seconds 4.13 4.13.1 TACACS+ Introduction TACACS+ (Terminal Access Controller Access-Control System) is a protocol for authentication, authorization and accounting (AAA).
PAGE 109
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management Network Access Server (NAS): It does not check the user data itself; rather, the data is forwarded to the central AAA server, which responds by checking the data and answering with an accept or a reject. EN PC User ID User ID Accept Accept NAS AAA-SERVER TACACS+ is configured with the following parameters: 4.13.
PAGE 110
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management  Authentication The device for configuration can be accessed via the serial interface (console), via the LAN with Telnet or SSH, or with a browser. Access authentication for each of these three access methods can be individually set up either to refer to the user accounts in the device itself, or to the the user accounts on the TACACS+ server.
PAGE 111
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 4.13.4 Authorization 왏 State: Activates authorization via TACACS+ server. If TACACS+ authorization is activated, all authorization data is transmitted via TACACS+ protocol to the configured TACACS+ server.
PAGE 112
LANCOM ES-2126+ and LANCOM ES-2126P+ 왏 Port 왏 QoS 왏 Reboot 왏 Security 왏 SNMP 왏 STP 왏 System 왏 TACACS+ 왏 TFTP 왏 Time 왏 Trunk 왏 VLAN 왏 Virtual Stack. The arguments “show” and “set” can be permitted or restricted separately for each command.   For the admin account all undefined commands must be permitted, e.g. using the "Permit Unmatched Commands" and "Permit Unmatched Args" options in the TACACS+ server configuration. TACACS+ authorization will only activate if the defined TACACS+ server is available.
PAGE 113
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 4.13.5 Accounting 왏 State: Activates accounting via TACACS+ server. If TACACS+ accounting is activated, all accounting data is transmitted via TACACS+ protocol to the configured TACACS+ server. TACACS+ accounting will only activate if the defined TACACS+ server is available.
PAGE 114
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 왏 VLAN: Port-based VLAN Enabled, Tag-based VLAN Enabled 왏 Module Swap: Module Inserted, Module Removed, Dual Media Swapped 왏 PoE: PoE Failure 4.14.2 E-Mail Alarm configuration is used to configure the persons who should receive the alarm message via email. It depends on your settings. An email address has to be set in the web page of alarm configuration. Then, user can read the trap information from the email.
PAGE 115
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 4.15 4.15.1 Configuration Save/Restore Here you can configure the settings for saving and restoring device configurations. For further information read the ’Save/Restore” section in the chapter ’Configuring and monitoring the LANCOM switch’. 4.15.2 Config file Here you can save and restore backups of device configurations.
PAGE 116
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Monitored Ingress Port: Set up the port for being monitored. It only monitor the packets received by the port you set up. Just tick the check box (ž) beside the port x and valid port is Port 1~26. 왏 Monitored Egress Port: Set up the port for being monitored. It only monitor the packets transmitted by the port you set up. Just tick the check box (ž) beside the port x and valid port is Port 1~26. EN Function name: 4.16.
PAGE 117
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN warding any packets in case its all ports become the members of the Isolated group. 쮿 Restricted Group 쮿 Function Description: The function of the Restricted Group can decide the direction of transmitting packets for the specific port. The packets received by the port with the “Ingress” mode of Restricted Group will be sent to the ports with the “Egress” mode of Restricted Group.
PAGE 118
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 4.17.1 Bandwidth Management Ingress Bandwidth Setting Ingress Bandwidth Setting function is used to set up the limit of Ingress bandwidth for each port. EN 4.17 쮿 Parameter Description: 왏 Port No.: Choose the port that you would like this function to work on it. Valid range of the port is 1~26. 왏 Rate: Set up the limit of Ingress bandwidth for the port you choose.
PAGE 119
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 4.17.2 Egress Bandwidth Setting EN Egress Bandwidth Setting function is used to set up the limit of Egress bandwidth for each port. 쮿 Parameter Description: 왏 Port No.: Choose the port that you would like this function to work on it. Valid range of the port is 1~26. 왏 Rate: Set up the limit of Egress bandwidth for the port you choose.
PAGE 120
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter Description: 왏 Storm Type: Disable: Disable the function of the bandwidth storm control. Broadcast Storm Control: Enable the function of bandwidth storm control for broadcast packets. Multicast Storm Control: Enable the function of bandwidth storm control for multicast packets. Unknown Unicast Storm Control: Enable the function of bandwidth storm control for unknown unicast packets.
PAGE 121
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management bit SERVICE TYPE field that specifies how the datagram should be handled. The field could be divided into six subfields as follows, PRECEDENCE (3 bits), D-Type (Delay Priority, 1 bit ), T-Type (Throughput Priority, 1bit), R-Type (Reliability Priority, 1bit ), M-Type (Monetary Cost Priority, 1bit ), and UNUSED (1bit ). EN User can randomly control these fields to achieve some special QoS goals.
PAGE 122
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 쐇 enable both VIP and DSCP Choose priorities of VIP and DSCP. 쐋 enable both TOS and DSCP Choose "DSCP". EN 쐏 enable both VIP and DSCP Choose priorities of VIP and DSCP. 쐄 enable both 802.1p and TOS Choose "TOS". 쐂 enable both 802.1p and DSCP Choose "DSCP". 쐆 enable both 802.1p and DSCP and TOS Choose "DSCP". 쐊 enable both 802.1p and DSCP and TOS and VIP Choose priorities of VIP and DSCP. VIP/DSCP > TOS > 802.
PAGE 123
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 왏 Weight (1~55): Over here, you can make an arrangement to Weight values of Queue 0 to Queue 3. The range of Weight you can set is 1~55. In default, the weight of Queue 0 is 1, the weight of Queue 1 is 2, the weight of Queue 2 is 4, and the weight of Queue 3 is 8. 4.18.2 VIP Port Setting When the port is set as VIP Port, the packets enter this port and will have highest transmitting priority.
PAGE 124
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 4.18.3 802.1p Setting 쮿 Parameter Description: 왏 802.1p Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Priority 1 is mapping to Queue 0, Priority 2 is mapping to Queue 1, Priority 3 is mapping to Queue 1, Priority 4 is mapping to Queue 2, Priority 5 is mapping to Queue 2, Priority 6 is mapping to Queue 3, and Priority 0 is mapping to Queue 3. 4.18.
PAGE 125
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 쮿 4.18.5 Parameter Description: 왏 TOS Delay Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Priority 1 is mapping to Queue 0, Priority 2 is mapping to Queue 1, Priority 3 is mapping to Queue 1, Priority 4 is mapping to Queue 2, Priority 5 is mapping to Queue 2, Priority 6 is mapping to Queue 3, and Priority 0 is mapping to Queue 3.
PAGE 126
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter Description: 왏 TOS Throughput Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Priority 1 is mapping to Queue 0, Priority 2 is mapping to Queue 1, Priority 3 is mapping to Queue 1, Priority 4 is mapping to Queue 2, Priority 5 is mapping to Queue 2, Priority 6 is mapping to Queue 3, and Priority 0 is mapping to Queue 3. 4.18.
PAGE 127
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter Description: 왏 TOS Reliability Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Priority 1 is mapping to Queue 0, Priority 2 is mapping to Queue 1, Priority 3 is mapping to Queue 1, Priority 4 is mapping to Queue 2, Priority 5 is mapping to Queue 2, Priority 6 is mapping to Queue 3, and Priority 0 is mapping to Queue 3. 4.18.
PAGE 128
LANCOM ES-2126+ and LANCOM ES-2126P+ EN 쮿 Chapter 4: Operation of Web- based Management 쮿 Parameter Description: 왏 TOS Monetary Cost Priority Mapping: Each Priority can select any of Queue 0 ~ Queue 3. In Default, Priority 0 is mapping to Queue 0, Priority 1 is mapping to Queue 0, Priority 2 is mapping to Queue 1, Priority 3 is mapping to Queue 1, Priority 4 is mapping to Queue 2, Priority 5 is mapping to Queue 2, Priority 6 is mapping to Queue 3, and Priority 0 is mapping to Queue 3. 4.18.
PAGE 129
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 쮿 Parameter Description: 왏 DSCP Priority Mapping: 64 kinds of priority traffic as mentioned above, user can set up any of Queue 0~3. In default, Priority 0~15 are mapping to Queue 0, Priority 16~31 are mapping to Queue 1, Priority 32~47 are mapping to Queue 0, Priority 48~63 are mapping to Queue 0. 4.
PAGE 130
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management Loopback 쮿 Function name: Loopback Test In the Loopback Test function, there are two different loopback tests. One is Internal Loopback Test and the other is External Loopback Test. The former test function will not send the test signal outside the switch box. The test signal only wraps around in the switch box. As to the latter test function, it will send the test signal to its link partner.
PAGE 131
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 4.19.3 Ping EN Ping Test function is a tool for detecting if the target device is alive or not through ICMP protocol which abounds with report messages. The switch provides Ping Test function to let you know that if the target device is available or not. You can simply fill in a known IP address and then click button.
PAGE 132
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 왏 Reset the management CPU Interface: When ping failure time reach configured value then switch will reset the managed switch's CPU interface. Default state is disable. 왏 Reboot the system: When ping failure time reach configured value then switch will reboot automatically. Default state is disable. Fail Count: Default Ping Failed Count= 100, Range for Setting: 1~1000 4.
PAGE 133
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management from using LANconfig to gain access to the configuration management and perform firmware updates.  Information about managing configurations and firmware is available in the sections 'Config File' and 'Save/Restore' in the chapter 'Configuring and monitoring the LANCOM switch'. EN 쮿 Parameter: 왏 Remote TFTP Server: Enter the IP address of the external TFTP server here.
PAGE 134
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN the report table, No., Time and Events are three fields contained in each trap record. 쮿 Parameter Description: 왏 No.: Display the order number that the trap happened. 왏 Time: Display the time that the trap happened. 왏 Events:Display the trap event name. 왏 Auto Upload Enable: Switch the enabled or disabled status of the auto upload function. 왏 Upload Log: Upload log data through tftp. 왏 Clear Log: Clear log data. 4.
PAGE 135
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management 2. Specifying what the filename and where the file is. You must specify full path and filename. Then, press button if your download is not successful, the switch will also be back to “Software Upgrade”, and it will not upgrade the software as well. EN When download is completed, the switch starts upgrading software. A reboot message will be prompted after completing upgrading software.
PAGE 136
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 4: Operation of Web- based Management EN 왏 Save and Reboot:Save the current settings as start configuration before rebooting the switch. 왏 Reboot: Reboot the system directly. 4.24 Logout You can manually logout by performing Logout function. In the switch, it provides another way to logout. You can configure it to logout automatically.
PAGE 137
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 5 Operation of CLI Management (englisch) 5.1 CLI Management DE Refer to Chapter 2 for basic installation. The following description is the brief of the network connection. -- Locate the correct DB-9 null modem cable with female DB-9 connector. Null modem cable comes with the management switch. Refer to the Appendix B for null modem cable configuration.
PAGE 138
LANCOM ES-2126+ und LANCOM ES-2126P+ DE 쮿 Kapitel 5: Operation of CLI Management (englisch) Fig. 4-1 Fig. 4-2 5.2 Commands of CLI Fig.
PAGE 139
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 5.2.1 Global Commands of CLI 쮿 end 왏 Syntax: end DE 왏 Description: Back to the top mode. When you enter this command, your current position would move to the top mode. If you use this command in the top mode, you are still in the position of the top mode. 왏 Argument: None. 왏 Possible value: None.
PAGE 140
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) ES-2126+(trunk)# exit ES-2126+# DE 쮿 help 왏 Syntax: help 왏 Description: To show available commands. Some commands are the combination of more than two words. When you enter this command, the CLI would show the complete commands. Besides, the command would help you classify the commands between the local commands and the global ones. 왏 Argument: None. 왏 Possible value: None.
PAGE 141
LANCOM ES-2126+ und LANCOM ES-2126P+ DE 쮿 Kapitel 5: Operation of CLI Management (englisch) logout Logout the system save start Save as start config save user Save as user config restore default Restore default config restore user Restore user config ES-2126+(ip)# 쮿 history 왏 Syntax: history [#] 왏 Description: To show a list of previous commands that you had ever run. When you enter this command, the CLI would show a list of commands which you had typed before.
PAGE 142
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 9. events 10. end 11. ip 12. help DE 13. history ES-2126+(ip)# history 3 Command history: 12. help 13. history 14. history 3 ES-2126+(ip)# 쮿 logout 왏 Syntax: logout 왏 Description: When you enter this command via Telnet connection, you would logout the system and disconnect.
PAGE 143
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) choose N or n, the IP address will keep the same one that you had saved before. DE If restoring default successfully, the CLI would prompt if reboot immediately or not. If you press Y or y, the system would reboot immediately; otherwise, it would be back to the CLI system. After restoring default configuration, all the changes in the startup configuration would be lost.
PAGE 144
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Restoring ... Restore User Configuration Successfully Press any key to reboot system. DE 쮿 save start 왏 Syntax: save start 왏 Description: To save the current configuration as the start one. When you enter this command, the CLI would save your current configuration into the nonvolatile FLASH. If you want the configuration still works after rebooting, save the configuration using the command ‘save start’.
PAGE 145
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Saving user... Save Successfully ES-2126+# DE 5.2.2 Local Commands of CLI Please note: to use one of the local commands, you first have to change to the corresponding configuration area, e.g. 802.1x set mode 1. 802.
PAGE 146
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 1:set 802.1x to Multi-host mode 왏 Possible value: : 1 to 26 : 0 or 1 DE 왏 Example: ES-2126+(802.1x)# set mode 2 1 쮿 set port- control 왏 Syntax: set port-control 왏 Description: To set up 802.1X status of each port.
PAGE 147
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) : 1 to 26 : 0-65535, default is 60 왏 Example: ES-2126+(802.1x)# set quiet-period 2 30 DE 쮿 set reAuthEnabled 왏 Syntax: set reAuthEnabled 왏 Description: A constant that define whether regular reauthentication will take place on this port.
PAGE 148
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Example: ES-2126+(802.1x)# set reAuthMax 2 2 왏 Description: A constant that defines a nonzero number of seconds between periodic reauthentication of the supplicant. 왏 Argument: : syntax 1,5-7, available from 1 to 26 : timer, range 1-65535 왏 Possible value: : 1 to 26 : 1-65535, default is 3600 왏 Example: ES-2126+(802.
PAGE 149
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 쮿 set state 왏 Syntax: set state DE 왏 Description: To configure the settings related with 802.1X Radius Server. 왏 Argument: : the IP address of Radius Server, and the IP format is xxx.xxx.xxx.
PAGE 150
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Description: A timer used by the Authenticator PAE state machine to determine when an EAPOL PDU is to be transmitted. 왏 Argument: : syntax 1,5-7, available from 1 to 26 : timer, range 1-65535 왏 Possible value: : 1 to 26 : 1-65535, default is 30 왏 Example: ES-2126+(802.1x)# set txPeriod 2 30 쮿 show mode 왏 Syntax: show mode 왏 Description: To display the mode of each port.
PAGE 151
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 6 Disable 쮿 show parameter 왏 Syntax: show parameter DE 왏 Description: To display the parameter settings of each port. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(802.1x)# show parameter port 1) port control : Auto reAuthMax : 2 txPeriod : 30 Quiet Period : 60 reAuthEnabled : ON reAuthPeriod : 3600 max.
PAGE 152
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) ES-2126+(802.1x)# show security Port Mode Status ====== ============ ============== Disable 2 Multi-host 3 Disable 4 Disable 5 Disable 6 Disable Unauthorized DE 1 쮿 show state 왏 Syntax: show state 왏 Description: To display the Radius server configuration. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(802.1x)# show state Radius Server: 192.168.1.
PAGE 153
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) : new account name 왏 Possible value: : A string must be at least 5 character. DE 왏 Example: ES-2126+(account)# add aaaaa Password: Confirm Password: ES-2126+(account)# 쮿 del 왏 Syntax: del 왏 Description: To delete an existing account. 왏 Argument: : existing user account 왏 Possible value: None.
PAGE 154
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Current username (aaaaa):bbbbb New password: Confirm password: Username changed successfully. DE Password changed successfully. 쮿 show 왏 Syntax: show 왏 Description: To show system account, including account name and identity. 왏 Argument: None. 왏 Possible value: None.
PAGE 155
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) <#>: 1 to 6 왏 Example: ES-2126+(alarm-email)# del mail-address 2 DE 쮿 del server-user 왏 Syntax: del server-user 왏 Description: To remove the server, user account and password. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(alarm-email)# del server-user 쮿 set mail-address 왏 Syntax: set mail-address <#> 왏 Description: To set up the email address.
PAGE 156
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: :email server ip address or domain name 왏 Possible value: None. DE 왏 Example: ES-2126+(alarm-email)# set server 192.168.1.6 쮿 set user 왏 Syntax: set user 왏 Description: To set up the account of the email server. 왏 Argument: : email server account 왏 Possible value: None.
PAGE 157
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Email Address 2: Email Address 3: Email Address 4: Email Address 5: DE Email Address 6: <> 쮿 del all 왏 Syntax: del all 왏 Description: To disable email, sms and trap of events.
PAGE 158
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) To disable the sms of the events. 왏 Argument: :del the range of sms, syntax 1,5-7 DE 왏 Possible value: : 1~22 왏 Example: ES-2126+(alarm-events)# del sms 1-3 쮿 del trap 왏 Syntax: del trap 왏 Description: To disable the trap of the events.
PAGE 159
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Description: To enable the email of the events. 왏 Argument: :set the range of email, syntax 1,5-7 DE 왏 Possible value: : 1~22 왏 Example: ES-2126+(alarm-events)# set email 1-3 쮿 set sms 왏 Syntax: set sms 왏 Description: To enable the sms of the events.
PAGE 160
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) show 왏 Description: The Show here is used to display the configuration of alarm event. DE 왏 Argument: None. 왏 Possible value: None.
PAGE 161
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 20 Module Removed 21 Moudle Media Swapped 22 PoE Failure DE 쮿 show (alarm) 왏 Syntax: show 왏 Description: The Show for alarm here is used to display the configuration of Trap, SMS or E-mail. 왏 Argument: None. 왏 Possible value: None.
PAGE 162
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Description: To delete sms server, user account and password. 왏 Argument: None. DE 왏 Possible value: None. 왏 Example: ES-2126+(alarm-sms)# del server-user 쮿 set phone- number 왏 Syntax: set phone-number <#> 왏 Description: To add sms phone number.
PAGE 163
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 쮿 set user 왏 Syntax: set user DE 왏 Description: To set up user account and password of sms server. 왏 Argument: : SMS server account 왏 Possible value: None. 왏 Example: ES-2126+(alarm-sms)# set user ABC 쮿 show 왏 Syntax: show 왏 Description: To display the configuration of SMS trap event. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(alarm-sms)# show SMS Server : 192.168.1.
PAGE 164
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) autologout 쮿 autologout 왏 Syntax: autologout DE 왏 Description: To set up the timer of autologout. 왏 Argument: : range 1 to 3600 seconds, 0 for autologout off, current setting is 180 seconds.
PAGE 165
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) set ingress-rate 왏 Description: To set up the ingress-rate of the ports. DE 왏 Argument: :syntax 1,5-7, available from 1 to 26 : 66-1024000(Kb).
PAGE 166
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Description: To display all current settings of the bandwidth. 왏 Argument: None. DE 왏 Possible value: None.
PAGE 167
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: None. 왏 Possible value: None. DE 왏 Example: ES-2126+(config-file)# export start Export successful. 쮿 export user- conf 왏 Syntax: 왏 Description: To run the export user-conf function. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(config-file)# export user-conf Export successful. 쮿 import start 왏 Syntax: 왏 Description: To run the import start function. 왏 Argument: None. 왏 Possible value: None.
PAGE 168
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) To run the import user-conf function. 왏 Argument: None. DE 왏 Possible value: None. 왏 Example: ES-2126+(config-file)# import user-conf Import successful. 쮿 set export-path 왏 Syntax: 왏 Description: To set up the file path and filename that user would like to export.
PAGE 169
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: None. 왏 Possible value: None. DE 왏 Example: ES-2126+(config-file)# show TFTP Server IP Address: 192.168.3.111 Export Path and Filename: log/21511.txt Import Path and Filename: log/21511.txt dhcp- boot 쮿 set dhcp- boot 왏 Syntax: 왏 Description: To set up the delay time for DHCP Boot. 왏 Argument: 왏 :range syntax: 0, 1-30.
PAGE 170
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Second : 30 ES-2126+(dhcp-boot)# diag DE 쮿 diag 왏 Syntax: diag 왏 Description: Diag is used to test whether EEPROM, UART, DRAM and Flash is normal or not. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(diag)# diag EEPROM Test : OK UART Test : OK DRAM Test : OK Flash Test : OK 쮿 Loopback 왏 Syntax: loopback 왏 Description: For Internal/External Loopback Test. 왏 Argument: None. 왏 Possible value: None.
PAGE 171
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) External Loopback Test : Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Fail DE 쮿 ping 왏 Syntax: ping 왏 Description: To confirm that whether the remote end-station or switch itself is alive or not. 왏 Argument: : IP address or domain name 왏 Possible value: IP address, e.g. 192.168.2.65 or domain name, e.g. tw.yahoo.com 왏 Example: ES-2126+(diag)# ping 192.168.1.115 Gateway : 192.
PAGE 172
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: None. 왏 Possible value: None. DE 왏 Example: ES-2126+(firmware)# show TFTP Server IP Address: 192.168.3.111 Path and Filename : FEL2SW26_ES2126_v2.05.img 쮿 upgrade 왏 Syntax: 왏 Description: To run the software upgrade function. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(firmware)# upgrade Upgrading firmware ...
PAGE 173
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 쮿 enable 왏 Syntax: enable DE 왏 Description: To enable the gvrp function. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(gvrp)# enable 쮿 group 왏 Syntax: group 왏 Description: To enter any of gvrp group for changing gvrp group setting. You can change the applicant or registrar mode of existing gvrp group per port.
PAGE 174
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) ES-2126+(gvrp-group-2)# show GVRP group VID: 2 Port Applicant Registrar 1 Non-Participant Normal 2 Non-Participant Normal 3 Non-Participant Normal 4 Non-Participant Normal 5 Non-Participant Normal 6 Non-Participant Normal 7 Normal Normal 8 Normal Normal 12 Normal Normal 13 Normal Normal DE ---- --------------- --------- : : 23 Normal Normal 24 Normal Normal 25 Normal Normal 26 Norm
PAGE 175
LANCOM ES-2126+ und LANCOM ES-2126P+ DE 쮿 Kapitel 5: Operation of CLI Management (englisch) 5 Non-Participant Fixed 6 Non-Participant Fixed 7 Normal Fixed 8 Normal Fixed 9 Normal Fixed 10 Normal Fixed 17 Normal Normal : : 23 Normal Normal 24 Normal Normal 25 Normal Normal 26 Normal Normal 쮿 set applicant 왏 Syntax: set applicant 왏 Description: To set default applicant mode for each port.
PAGE 176
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) To set default registrar mode for each port.
PAGE 177
LANCOM ES-2126+ und LANCOM ES-2126P+ DE 쮿 Kapitel 5: Operation of CLI Management (englisch) 1 20 Enable 60 1000 Normal Normal 2 20 Enable 60 1000 Normal Normal 3 20 Enable 60 1000 Normal Normal 4 20 Enable 60 1000 Normal Normal 5 20 Enable 60 1000 Normal Normal 6 20 Enable 60 1000 Normal Normal 7 20 Enable 60 1000 Normal Normal 8 20 Enable 60 1000 Normal Normal 9 20 Enable 60 1000 Normal Normal 10 20 Enable 60 1000 Normal Normal : : : 176 22 20 Disable
PAGE 178
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 쮿 set timer 왏 Syntax: set timer DE 왏 Description: To set gvrp join time, leave time, and leaveall time for each port. 왏 Argument: : port range, syntax 1,5-7, available from 1 to 26 : join timer, available from 20 to 100 : leave timer, available from 60 to 300 : leaveall timer, available from 1000 to 5000 Leave Time must equal double Join Time at least.
PAGE 179
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) DE ---- --------- ---------- ------------- -------------- --------- ---------1 20 Disable 60 1000 Normal Normal 2 20 Disable 60 1000 Normal Normal 3 20 Disable 60 1000 Normal Normal 4 20 Disable 60 1000 Normal Normal : : : 23 20 Disable 60 1000 Normal Normal 24 20 Disable 60 1000 Normal Normal 25 20 Disable 60 1000 Normal Normal 26 20 Disable 60 1000 Normal Normal 쮿 show counter
PAGE 180
LANCOM ES-2126+ und LANCOM ES-2126P+ Counter Name Received Transmitted -------------------- -------- ----------- Total GVRP Packets 0 0 Invalid GVRP Packets 0 ---- LeaveAll message 0 0 JoinEmpty message 0 0 JoinIn message 0 0 LeaveEmpty message 0 0 Empty message 0 0 DE 쮿 Kapitel 5: Operation of CLI Management (englisch) 쮿 show group 왏 Syntax: show group 왏 Description: To show the gvrp group. 왏 Argument: None. 왏 Possible value: None.
PAGE 181
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: : hostname, max. 40 characters. 왏 Possible value: : hostname, max. 40 characters. DE 왏 Example: ES-2126+# hostname Company Company# igmp- snooping 쮿 add allowed- group 왏 Syntax: add allowed-group 왏 Description: To add the entry of allowed IP multicast group. 왏 Argument: : the range of IP multicast. : VLAN ID. 1-4094 or any.
PAGE 182
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) : last multicast address of the group. 왏 Possible value: : 224.0.1.0 - 239.255.255.255 왏 Example: ES-2126+(igmp-snooping)# add mvr-allow-group 224.0.1.0 224.0.2.0 쮿 add static- multicast 왏 Syntax: add static-multicast 왏 Description: To add ab entry to static ip-multicast. 왏 Argument: : the range of IP multicast. : VLAN ID.
PAGE 183
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Example: ES-2126+(igmp-snooping)# del allowed-group 1 DE 쮿 del mvr- allow- group 왏 Syntax: del mvr-allow-group 왏 Description: To delete an entry of the MVR allowed group entries. 왏 Argument: : index of the MVR allowed group entry.
PAGE 184
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) : last multicast address of the group. 왏 Possible value: : 1 - 10 : 224.0.1.0 - 239.255.255.255 왏 Example: ES-2126+(igmp-snooping)# 224.0.2.0 225.0.0.4 modify DE : 224.0.1.0. - 239.255.255.255 mvr-allow-group 2 쮿 modify static- multicast 왏 Syntax: del static-multicast 왏 Description: To modify an static-ip multicast entry .
PAGE 185
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 쮿 set mode 왏 Syntax: set mode DE 왏 Description: To set up the mode of IGMP Snooping. 왏 Argument: : 0:disable, 1:active, 2:passive 왏 Possible value: : 0,1or 2 왏 Example: ES-2126+(igmp-snooping)# set mode 2 쮿 set mvr- host-timeout 왏 Syntax: set mvr-host-timeout 왏 Description: To set up MVR Host Timeout.
PAGE 186
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) : 1 - 4094 왏 Example: ES-2126+(igmp-snooping)# set mvr-state 1 22 DE 쮿 set mvr- vid 왏 Syntax: set mvr-vid 왏 Description: To set MVR Vlan ID. 왏 Argument: : MVR Vlan ID 왏 Possible value: : 1 - 4094 왏 Example: ES-2126+(igmp-snooping)# set mvr-vid 22 쮿 set rad-igmp-port 왏 Syntax: set rad-igmp-port 왏 Description: To set up radius-igmp enabled ports.
PAGE 187
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: : 0 to 10 times 왏 Possible value: : 0 - 10 DE 왏 Example: ES-2126+(igmp-snooping)# set rad-igmp-retry 5 쮿 set rad-igmp-state 왏 Syntax: set rad-igmp-state 왏 Description: To set up radius-igmp state.
PAGE 188
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: : 0 to 60 seconds 왏 Possible value: : 0 - 60 DE 왏 Example: ES-2126+(igmp-snooping)# set rad-igmp-timeout 5 쮿 show client- info 왏 Syntax: show client-info 왏 Description: To display information about the clients connected to a port.
PAGE 189
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Port Limit Port Limit Port Limit DE ---- ----- ---- ----- ---- ----1 22 10 256 19 256 2 256 11 256 20 256 3 256 12 256 21 256 4 256 13 256 22 256 5 256 14 256 23 256 6 256 15 256 24 256 7 256 16 256 25 256 8 256 17 256 26 256 9 256 18 256 쮿 show igmp- snooping 왏 Syntax: 왏 Description: To display IGMP snooping mode and allowed IP multicast entry. 왏 Argument: None.
PAGE 190
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: None. 왏 Possible value: None. DE 왏 Example: ES-2126+(igmp-snooping)# show multicast IP Multicast: None 쮿 show mvr- config 왏 Syntax: 왏 Description: To display the MVR configuration. 왏 Argument: None. 왏 Possible value: None.
PAGE 191
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) None. 왏 Example: ES-2126+# igmp-snooping ES-2126+(igmp-snooping)# show mvr-group-membership DE 1) Group Address: 224.0.1.76 Port Member : 5 2) Group Address: 224.0.1.24 Port Member : 5 3) Group Address: 224.0.1.41 Port Member : 5 There are 125 group entries available 쮿 show query 왏 Syntax: 왏 Description: To display the query interval. 왏 Argument: None. 왏 Possible value: None.
PAGE 192
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) None. 왏 Example: ES-2126+(igmp-snooping)# show rad-igmp DE Radius Server: 192.168.1.1 쮿 show static- multicast 왏 Syntax: 왏 Description: To display static-ip multicast entry. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126P+(igmp-snooping)# show static-multicast 1) IP Address : 244.1.1.
PAGE 193
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 쮿 enable dhcp 왏 Syntax: enable dhcp DE 왏 Description: To enable the system DHCP function and set DNS server via manual or auto mode. 왏 Argument: : set DNS by using manual or auto mode. 왏 Possible value: : manual or auto 왏 Example: ES-2126+(ip)# enable dhcp manual 쮿 set dns 왏 Syntax: set dns 왏 Description: To set the IP address of DNS server.
PAGE 194
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Possible value: : 192.168.1.1 or others : 255.255.255.0 or others 왏 Example: ES-2126+(ip)# 192.168.1.253 set ip 192.168.1.2 255.255.255.0 쮿 show 왏 Syntax: show 왏 Description: To display the system’s DHCP function state, IP address, subnet mask, default gateway, DNS mode, DNS server IP address and current IP address. 왏 Argument: None. 왏 Possible value: None.
PAGE 195
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) To clear the log data. 왏 Argument: None. DE 왏 Possible value: None. 왏 Example: ES-2126+(log)# clear 쮿 disable auto-upload 왏 Syntax: disable auto-upload 왏 Description: To disable the auto-upload function. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(log)# disable auto-upload 쮿 enable auto- upload 왏 Syntax: enable auto-upload 왏 Description: To enable the auto-upload function. 왏 Argument: None.
PAGE 196
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Description: To show a list of trap log events. When any of log events happens, it will be recorded and using show command in log function to query. Up to 120 log records are supported. DE 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(log)# show Tftp Server : 0.0.0.
PAGE 197
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) login- protect 쮿 set Lock-Minutes 왏 Syntax: set Lock-Minutes DE 왏 Description: To set login lock time. 왏 Argument: : time in minutes 왏 Possible value: : numeric characters from 1 to 10 왏 Example: ES-2126P+(login-protect)# set Lock-Minutes 4 쮿 set Login-errors 왏 Syntax: set Login-errors 왏 Description: To set login error count.
PAGE 198
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Example: ES-2126+(login-protect)# show mac- table <> DE 쮿 del 왏 Syntax: del 왏 Description: To delete the mac alias entry. 왏 Argument: : mac address, format: 00-02-03-04-05-06 왏 Possible value: : mac address 왏 Example: ES-2126+(mac-table-alias)# del 00-44-33-44-55-44 쮿 set 왏 Syntax: set 왏 Description: To set up the mac alias entry.
PAGE 199
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Description: To display the mac alias entry. 왏 Argument: None. DE 왏 Possible value: None. 왏 Example: ES-2126+(mac-table-alias)# show MAC Alias List MAC Address Alias ----- ----------------- ---------------1) 00-02-03-04-05-06 aaa 2) 00-33-03-04-05-06 ccc <> 쮿 search 왏 Syntax: search 왏 Description: To look for the relative mac information in mac table.
PAGE 200
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) ---------------- ----------------- ---- ---- ---------------00-40-c7-88-00-06 1 0 Dynamic ES-2126+(mac-table-information)# DE 쮿 show 왏 Syntax: show 왏 Description: To display all mac table information. 왏 Argument: None. 왏 Possible value: None.
PAGE 201
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Possible value: : 10-1000000 seconds or 0 왏 Example: ES-2126+(mac-table-maintain)# set aging 300 DE 쮿 set learning 왏 Syntax: set learning 왏 Description: To set up the maximum amount of MAC that each port can learn.
PAGE 202
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 1 8191 2 8191 3 8191 4 8191 5 8191 DE ------ ------------------------- : : : 21 8191 22 8191 23 8191 24 8191 25 8192 26 8192 <> 쮿 disable 왏 Syntax: disable 왏 Description: To disable port security for a port. 왏 Argument: : Number of port that you want to disable.
PAGE 203
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) To enable port security for a port. 왏 Argument: : number of port that you want to enable. DE 왏 Possible value: : 1 - 26 왏 Example: ES-2126+(mac-table-port-security)# enable 2 쮿 show 왏 Syntax: show 왏 Description: To display enabled and disabled port security per port. 왏 Argument: None. 왏 Possible value: None.
PAGE 204
LANCOM ES-2126+ und LANCOM ES-2126P+ 11 Disable 12 Disable 13 Disable 14 Disable 15 Disable 16 Disable 17 Disable 18 Disable 19 Disable 20 Disable 21 Disable DE 쮿 Kapitel 5: Operation of CLI Management (englisch) ...(q to quit) <> 쮿 add 왏 Syntax: add 왏 Description: To enable a static mac entry for a port.
PAGE 205
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) del 왏 Description: To delete a static mac entry for a port. DE 왏 Argument: : mac adress 왏 Possible value: : format 01-02-03-04-05-06 (alpha numeric characters) 왏 Example: ES-2126+(mac-table-port-security-port-2)# 66-78-64-88 del 쮿 show 왏 Syntax: show 왏 Description: To display static mac entries for a port. 왏 Argument: None. 왏 Possible value: None.
PAGE 206
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) : VLAN id, from 1 to 4094 : which queue you want to set, from 0 to 3 : forwarding rule, from 0 to 2 0:static DE 1:drop destination address matches 2:drop source address matches : forwarded destination port, form 1 to 26 왏 Possible value: : 1 to 4094 : 0 to 3 : 0 to 2 : 1 to 26 왏 Example: ES-2126+ (mac-table-static-mac)# add 00-22-44-55-66-77 1 0 0 6 쮿 del 왏 Syntax: del
PAGE 207
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) None. 왏 Possible value: None.
PAGE 208
LANCOM ES-2126+ und LANCOM ES-2126P+ [ ] Access type. a(ccept) or d(eny). 왏 Possible value: [ ] No default and it must be set. [ ] The range is 1-4095 and can be set to any. [ ] For example, 192.168.1.90-192.168.1.90 or any. [ ] For example, 1 or 1-8 or 1,3-5 or any [ ] For example, h(ttp),s(nmp),t(elnet) or any. No default and it must be set.
PAGE 209
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Name : Tom 192.168.1.30-192.168.1.80 Type : SNMP VlanID : 2 Action : Deny IP : Port : 1,2 DE ES-2126+(management)# delete 1 ES-2126+(management)# show Security rule list is empty now 쮿 edit the specific management policy entry. 왏 Available range: 1 to 65536. 왏 Syntax: Usage: set [ ] [ ] [ ] [ ] [ ] Synopsis: set name Mary vid 20 ip 192.
PAGE 210
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) [ ] The range is 1-4095 and can be set to any. [ ] For example, 192.168.1.90-192.168.1.90 or any For example, 1 or 1-8 or 1,3-5 or any [ ] For example, h(ttp),s(nmp),t(elnet) or any No default and it must be set. DE [ ] 왏 Example: ES-2126+(management)# edit 1 ES-2126+(management-edit-1)# set name Tom vid 2 ip 192.168.1.30-192.168.1.
PAGE 211
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) poe 쮿 set priority 왏 Syntax: set priority DE 왏 Description: To set the PoE priority on ports. 왏 Argument: ¡G : set priority as 0:Low, 1:Normal, 2:High 왏 Possible value: : 1 to 24 : 0, 1 or 2 왏 Example: ES-2126+(poe)# set priority 1-12 2 쮿 set state 왏 Syntax: set state 왏 Description: To set the PoE state on ports.
PAGE 212
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: None. 왏 Possible value: None. Vmain : 48.3 V Imain : 0.0 A Pconsume : 0.
PAGE 213
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) ------------------------- | -- -- -- -- -- -- -- -- --- -- -- DE Port On |X X X X X X X X X X X X AC Disconnect Port Off X X X | X X X X X X X X X DC Disconnect Port Off X X X | X X X X X X X X X Overload Port Off X X X | X X X X X X X X X Short Circuit Port Off X X X | X X X X X X X X X Over Temp.
PAGE 214
LANCOM ES-2126+ und LANCOM ES-2126P+ 15 Normal Enable Normal 0.0 0 0 16 Normal Enable Normal 0.0 0 0 17 Normal Enable Normal 0.0 0 0 18 Normal Enable Normal 0.0 0 0 19 Normal Enable Normal 0.0 0 0 20 Normal Enable Normal 0.0 0 0 21 Normal Enable Normal 0.0 0 0 22 Normal Enable Normal 0.0 0 0 23 Normal Enable Normal 0.0 0 0 24 Normal Enable Normal 0.
PAGE 215
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) : 1 ~ 26 왏 Example: ES-2126+(port)# disable state 12 DE 쮿 enable state 왏 Syntax: enable state 왏 Description: To enable the communication capability of the port.
PAGE 216
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: :port range, syntax 1,5-7, available from 1 to 26 : set its flow control as symmetric : set its flow control as asymmetric DE 왏 Possible value: : 1 to 26 왏 Example: ES-2126+(port)# set flow-control 3-6 symmetric 쮿 set speed-duplex 왏 Syntax: set speed-duplex |[<10|100|1000> ] 왏 Description: To set up the speed and duplex of all ports.
PAGE 217
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) show conf 왏 Description: To display the each port’s configuration about state, speed-duplex and flow control. DE 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(port)# show conf 쮿 show desciption 왏 Syntax: show description 왏 Description: To display the ports’ descriptions. 왏 Argument: None. 왏 Possible value: None.
PAGE 218
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 9 10 11 12 DE 13 14 15 16 17 18 19 20 21 22 port22 23 24 25 26 쮿 show detail- counter 왏 Syntax: show detail-counter <#> 왏 Description: To display the detail-counter for each port.
PAGE 219
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) show media 왏 Description: To display the module 25 or 26 information.
PAGE 220
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Description: To display the summary counting of each port’s traffic. 왏 Argument: None. DE 왏 Possible value: None. 왏 Example: ES-2126+(port)# show simple-counter 쮿 show status 왏 Syntax: show status 왏 Description: To display the port’s current status. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(port)# show status Port Media Link State Auto Nego.
PAGE 221
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 6 ---- TP Down Enable Enable ----/---- ---- 7 ---- TP Down Enable Enable ----/---- ---- DE : : : 24 ---- TP Down Enable Enable ----/---- ---- 25 ---- TP Down Enable Enable ----/---- ---- 26 ---- TP Down Enable Enable ----/---- ---- qos 쮿 disable 1p 왏 Syntax: disable 1p 왏 Description: To disable 802.1p qos. 왏 Argument: None. 왏 Possible value: None.
PAGE 222
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) None. 왏 Possible value: None. DE 왏 Example: ES-2126+(qos)# disable dscp 쮿 disable qos 왏 Syntax: disable qos 왏 Description: To disable qos function. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(qos)# disable qos 쮿 disable tos 왏 Syntax: disable tos 왏 Description: To disable IP TOS qos. 왏 Argument: None. 왏 Possible value: None.
PAGE 223
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: None. 왏 Possible value: None. DE 왏 Example: ES-2126+(qos)# enable 1p 쮿 enable dscp 왏 Syntax: enable dscp 왏 Description: To enable IP DSCP qos. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(qos)# enable dscp 쮿 enable qos 왏 Syntax: enable qos 왏 Description: To enable qos function. 왏 Argument: None. 왏 Possible value: None.
PAGE 224
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) To enable IP TOS qos. 왏 Argument: None. DE 왏 Possible value: None. 왏 Example: ES-2126+(qos)# enable tos 쮿 set dscp 왏 Syntax: set dscp [] [] [] [] 왏 Description: To set IP DSCP qos weighting for 4 queues. 왏 Argument: : queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3. : priority level.
PAGE 225
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) You don't need to use all of queues, but must assign queues in order. 왏 Syntax: 1,2 or 2,5-7, available from 0 to 7. 왏 Possible value: : 0 to 7. DE 왏 Example: ES-2126+(qos)# set pri-tag q0 0 q1 2 q3 4 쮿 set sche 왏 Syntax: set sche 왏 Description: To set qos schedule and weight for 4 queues.
PAGE 226
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) : queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3. : priority level. One queue has been assigned 2 different priorities. You don't need to use all of queues, but must assign queues in order DE (from low queue to high queue). 왏 Syntax: 1,2 or 2,5-7, available from 0 to 7. 왏 Possible value: : 0~3 : 0 to 7.
PAGE 227
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) None. 왏 Example: ES-2126+(qos)# show dscp ip diffserv classification DE ==================== Global QoS mode: Enable QoS Disable 802.1p Priority Disable ip tos classification Enable ip diffserv classification Scheduling: weighted round robin method. weight: = 16. wrr 0 = 1; wrr 1 = 1; wrr 2 = 8; wrr 3 weighted range: 1~55. P0~63: Priority 0~63.
PAGE 228
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 24 27 1 25 1 26 1 1 29 1 30 1 2 33 2 34 2 2 37 2 38 2 2 41 2 42 2 2 45 2 46 2 3 49 3 50 3 3 53 3 54 3 3 57 3 58 3 3 61 3 62 3 1 28 31 1 32 2 36 39 DE 35 2 40 43 2 44 47 2 48 51 3 52 55 3 56 59 3 60 63 3 쮿 show port 왏 Syntax: show port 왏 Description: To show VIP port configuration. 왏 Argument: None. 왏 Possible value: None.
PAGE 229
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Global QoS mode: Enable QoS Enable 802.1p Priority Disable ip tos classification Disable ip diffserv classification DE Port No Mode Port No Mode -------- ------- --------- ------1 Enable 2 Enable 3 Enable 4 Enable 5 Enable 6 Enable : : 23 Disable 24 Disable 25 Disable 26 Disable 쮿 show priority-tag 왏 Syntax: show priority-tag 왏 Description: To show 802.1p Qos configuration. 왏 Argument: None.
PAGE 230
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) weight: = 16. wrr 0 = 1; wrr 1 = 1; wrr 2 = 8; wrr 3 weighted range: 1~55. Priority 0~7. Default mode: Queue0: P0,P1; Queue1: P2,P3; Queue2: P4,P5; Queue3: P6,P7. P0 P1 P2 P3 P4 P5 P6 P7 ---- ---- ---- ---- ---- ---- ---- ---Queue 0 0 1 1 2 2 3 3 쮿 show tos 왏 Syntax: show tos 왏 Description: To show IP tos Qos configuration. 왏 Argument: None. 왏 Possible value: None.
PAGE 231
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Scheduling: weighted round robin method. weight: = 16. wrr 0 = 1; wrr 1 = 1; wrr 2 = 8; wrr 3 weighted range: 1~55. DE P0~7: Priority 0~7. Default mode: Queue0: P0,P1; Queue1: P2,P3; Queue2: P4,P5; Queue3: P6,P7.
PAGE 232
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) reboot 쮿 reboot 왏 Syntax: reboot DE 왏 Description: To reboot the system. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+# reboot security <> 쮿 set 왏 Syntax: set 왏 Description: To set up the function of the isolated group.
PAGE 233
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) None. 왏 Possible value: None. DE 왏 Example: ES-2126+(security-isolated-group)# show Isolated group: 2 3 4 <> 쮿 disable 왏 Syntax: disable 왏 Description: To disable the function of mirror. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(security-mirror)# disable 쮿 enable 왏 Syntax: enable 왏 Description: To enable the function of mirror. 왏 Argument: None. 왏 Possible value: None.
PAGE 234
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) set 왏 Description: To set up the monitoring port and monitored ports of the mirror function. User can monitor the ports that receive or transmit the packets.
PAGE 235
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) snmp 쮿 disable 왏 Syntax: disable set-community DE disable snmp 왏 Description: The Disable here is used for the de-activation of snmp or set-community. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(snmp)# disable set-community ES-2126+(snmp)# disable snmp 쮿 enable 왏 Syntax: enable set-community enable snmp 왏 Description: The Enable here is used for the activation snmp or set-community. 왏 Argument: None.
PAGE 236
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Description: The Set here is used for the setup of get-community, set-community, trap host ip, host port and trap- community.
PAGE 237
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Trap Host 2 IP Address: 0.0.0.0 Port: 162 Community: public Trap Host 3 IP Address: 0.0.0.0 Port: 162 Community: public DE Trap Host 4 IP Address: 0.0.0.0 Port: 162 Community: public Trap Host 5 IP Address: 0.0.0.0 Port: 162 Community: public Trap Host 6 IP Address: 0.0.0.0 Port: 162 Community: public stp 쮿 MCheck 왏 Syntax: MCheck 왏 Description: To force the port to transmit RST BPDUs.
PAGE 238
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) ES-2126+(stp)# disable 쮿 enable 왏 Syntax: enable DE 왏 Description: To enable the function of STP. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(stp)# enable 쮿 set config 왏 Syntax: set config 왏 Description: To set up the parameters of STP. 왏 Argument: : priority must be a multiple of 4096,available from 0 to 61440.
PAGE 239
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 쮿 set port 왏 Syntax: set port DE 왏 Description: To set up the port information of STP. 왏 Argument: : syntax 1,5-7, available from 1 to 26 : 0, 1-200000000.
PAGE 240
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) To display the STP configuration data. 왏 Argument: None. DE 왏 Possible value: None. 왏 Example: ES-2126+(stp)# show config STP State Configuration : Spanning Tree Protocol : Enabled Bridge Priority (0-61440) : 61440 Hello Time (1-10 sec) : 2 Max. Age (6-40 sec) : 20 Forward Delay (4-30 sec) : 15 Force Version : RSTP 쮿 show port 왏 Syntax: show port 왏 Description: To display the port information of STP.
PAGE 241
LANCOM ES-2126+ und LANCOM ES-2126P+ DE 쮿 Kapitel 5: Operation of CLI Management (englisch) 2 Auto DISCARDING 2000000 128 Yes 3 Auto DISCARDING 2000000 128 Yes 4 Auto DISCARDING 2000000 128 Yes 5 Auto DISCARDING 2000000 128 Yes : : : 23 Auto DISCARDING 200000 128 No 24 Auto DISCARDING 200000 128 No 25 Auto DISCARDING 20000 128 No 26 Auto DISCARDING 20000 128 No 쮿 show status 왏 Syntax: show status 왏 Description: To display of the status of STP. 왏 Argument: None.
PAGE 242
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Bridge Priority : 00:40:C7:D8:09:1D Designated Priority : 61440 Root Port : 0 Root Path Cost : 0 Current Max. Age(sec) : 20 Current Forward Delay(sec) : 15 Hello Time(sec) : 2 STP Topology Change Count : 0 DE Designated Root : 61440 Time Since Last Topology Change(sec) : 848 system 쮿 set contact 왏 Syntax: set contact 왏 Description: To set the contact description of the switch.
PAGE 243
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Example: ES-2126+(system)# set device-name CR-2600 DE 쮿 set location 왏 Syntax: set location 왏 Description: To set the location description of the switch. 왏 Argument: : string length up to 40 characters 왏 Possible value: : A, b, c, d, ... ,z and 1, 2, 3, …. etc.
PAGE 244
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) BIOS Version : v1.05 Firmware Version : v2.07 Serial Number : 031203000004 Host IP Address : 192.168.1.1 Host MAC Address : 00-00-8c-00-d8-00 Device Port DE Hardware-Mechanical Version : v1.01-v1.01 : UART * 1 TP *24 Fiber * 2 RAM Size : 16 M Flash Size : 2 M tac- plus 쮿 show access 왏 Syntax: show access 왏 Description: Shows the access configuration.
PAGE 245
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Authorization : Enable Fallback to Local Authorization: Enable Accounting : Enable Secret Key: secret DE # Server IP - --------------1 10.1.1.1 2 0.0.0.0 쮿 enable 왏 Syntax: enable 왏 Description: Enables the TACACS+ functions for accounting, authorization and fallback to local authorization. 왏 Arguments: Accounting: enables the TACACS+ accounting. Authorization: enables the TACACS+ authorization.
PAGE 246
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Sets the primary and secondary access mode for the login via console (outband). 왏 Arguments: Method from 0 to 2: DE 0: Authentication via local user accounts of the device. 1: Authentication via TACACS+-Server. 2: No authentication required (for method 2 only).
PAGE 247
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Example: ES-2126+(tac-plus)# set key secret Sets the encryption key to “secret”. DE 쮿 set retry 왏 Syntax: set retry 왏 Description: Sets the access retry value. When the login failed for the number of retries, the secondary login method will be used. If TACACS+ is defined as primary access mode, the secondary TACACS+ server is used after the number of login failures has reached the access retry value.
PAGE 248
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Sets the primary access mode for the login via telnet to TACACS+ and the secondary access mode to local user accounts. DE 쮿 set web- access 왏 Syntax: set web-access 왏 Description: Sets the primary and secondary access mode for the login via web browser. 왏 Arguments: Method from 0 to 2: 0: Authentication via local user accounts of the device. 1: Authentication via TACACS+-Server.
PAGE 249
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 쮿 show 왏 Syntax: show DE 왏 Description: To display the information of tftp server. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(tftp)# show Tftp Server : 192.168.3.111 time 쮿 set daylightsaving 왏 Syntax: set daylightsaving
왏 Description: To set up the daylight saving.
PAGE 250
LANCOM ES-2126+ und LANCOM ES-2126P+ : (01-12)
: (01-31) : (00-23) 왏 Example: ES-2126+(time)# set daylightsaving 3 10/12/01 11/12/01 쮿 set manual 왏 Syntax: set manual 왏 Description: To set up the current time manually.
PAGE 251
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Synchronizing...(1) Synchronization success DE 쮿 show 왏 Syntax: show 왏 Description: To show the time configuration, including “Current Time”, “NTP Server”,” Timezone”, ” Daylight Saving”,” Daylight Saving Start” and “Daylight Saving End” 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(time)# show Current Time NTP Server Timezone Day light Saving : Wed Apr 21 06:16:22 2005 : 209.81.9.
PAGE 252
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) ES-2126+(trunk)# del trunk 1 쮿 set hash 왏 Syntax: set hash DE 왏 Description: To set up trunk hash method. 왏 Argument: : lacp hash method 0: DA and SA 1: SA 2: DA Note : This hash method applies to both LACP and static trunk. 왏 Possible value: : 0~2 왏 Example: ES-2126+(trunk)# set hash 2 쮿 set priority 왏 Syntax: set priority 왏 Description: To set up the LACP system priority.
PAGE 253
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) To set up the status of trunk, including the group number and mode of the trunk as well as LACP mode. 왏 Argument: : syntax 1,5-7, available from 1 to 26 DE : static : adopt the static link aggregation lacp : adopt the dynamic link aggregation- link aggregation control protocol : 1-3.
PAGE 254
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Member Ports: 1 Ready Ports:1 Aggregator 2) Method: LACP DE Member Ports: 2 Ready Ports: : : : 쮿 show lacp-config 왏 Syntax: show lacp-config 왏 Description: To display the value of LACP Priority. 왏 Argument: None. 왏 Possible value: None.
PAGE 255
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Example: ES-2126+(trunk)# show lacp-detail 2 Aggregator 2 Information: DE Actor Partner --------------------------------- -------------------------------System Priority Address MAC Address System Priority MAC --------------- ----------------- --------------- ---------------32768 00-00-00-00-00 Port Key 00-40-c7-e8-00-02 Trunk Status 32768 Port 00- Key ------ -------- ----------------- --------------- -
PAGE 256
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) port Status Method Group Active LACP Aggtregator ====== ======== ======= ============= ============= ======== None 0 Active 1 Ready 2 LACP 1 Active 2 --- 3 LACP 1 Active 3 --- 4 LACP 1 Active 4 --- 5 LACP 1 Active 5 --- 6 None 0 Active 6 --- 7 None 0 Active 7 --- 8 None 0 Active 8 --- 9 None 0 Active 9 --- 10 None 0 Active 10 --- 11 None 0 Active 11 -
PAGE 257
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) VLAN 쮿 del port- group 왏 Syntax: del port-group DE 왏 Description: To delete the port-based VLAN group. 왏 Argument: : port-VLAN name 왏 Possible value: : port-VLAN name 왏 Example: ES-2126+(VLAN)# del port-group VLAN-2 쮿 del tag-group 왏 Syntax: del tag-group 왏 Description: To delete the tag-based VLAN group.
PAGE 258
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Example: ES-2126+(VLAN)# disable double-tag DE 쮿 disable drop- untag 왏 Syntax: disable drop-untag 왏 Description: To disable drop-untag. 왏 Argument: 왏 : which port(s) you want not to drop untagged frames.
PAGE 259
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Possible value: None. 왏 Example: ES-2126+(VLAN)# disable symmetric DE 쮿 enable double- tag 왏 Syntax: enable double-tag 왏 Description: To enable double-tag. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(VLAN)# enable double-tag 쮿 enable drop- untag 왏 Syntax: enable drop-untag 왏 Description: To enable drop-untag. 왏 Argument: 왏 : which port(s) you want to drop untagged frames.
PAGE 260
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: None. 왏 Possible value: None. DE 왏 Example: ES-2126+(VLAN)# enable svl 쮿 enable symmetric 왏 Syntax: enable symmetric 왏 Description: To drop frames from the non-member port. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(VLAN)# enable symmetric 쮿 set mgt- vlan 왏 Syntax: set mgt-vlan 왏 Description: To set configuration of port-based vlan.
PAGE 261
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) set mode 왏 Description: To switch VLAN mode between port-based and tag-based modes. DE 왏 Argument: : port or tag tag: set tag-based VLAN port: set port-based VLAN 왏 Possible value: : port or tag 왏 Example: ES-2126+(VLAN)# set mode tag 쮿 set port- group 왏 Syntax: set port-group 왏 Description: To add or edit a port-based VLAN group.
PAGE 262
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) : which priority you want to set, available from 0 to 7 왏 Possible value: : 1 to 26 : 1 to 4094 DE : 0 to 7 왏 Example: ES-2126+(VLAN)# set pvid 3,5,6-8 5 6 쮿 set tag- group 왏 Syntax: set tag-group 왏 Description: To add or edit the tag-based VLAN group.
PAGE 263
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Argument: None. 왏 Possible value: None. DE 왏 Example: ES-2126+(VLAN)# show config Current VLAN mode:Tag-based VLAN Global setting: Symmetric VLAN : Disable (Asymmetric) SVL : Disable (IVL) Double tag : Disable 쮿 show group 왏 Syntax: show group 왏 Description: To display VLAN mode and VLAN group. 왏 Argument: None. 왏 Possible value: None. 왏 Example: ES-2126+(VLAN)# show group Vlan mode is tag-based.
PAGE 264
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) Untag :1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 2) Name :VLAN-2 :2 DE VID Member:2 3 4 5 6 13 14 15 Untag : 쮿 show pvid 왏 Syntax: show pvid 왏 Description: To display pvid, priority and drop untag result. 왏 Argument: None. 왏 Possible value: None.
PAGE 265
LANCOM ES-2126+ und LANCOM ES-2126P+ DE 쮿 Kapitel 5: Operation of CLI Management (englisch) 12 1 0 Disable 13 1 0 Disable 14 1 0 Disable 15 1 0 Disable 16 1 0 Disable 17 1 0 Disable 18 1 0 Disable 19 1 0 Disable 20 1 0 Disable 21 1 0 Disable 22 1 0 Disable 23 1 0 Disable 24 1 0 Disable 25 1 0 Disable 26 1 0 Disable vs 쮿 disable 왏 Syntax: disable 왏 Description: To disable the virtual stack. 왏 Argument: None. 왏 Possible value: None.
PAGE 266
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) To enable the virtual stack. 왏 Argument: None. DE 왏 Possible value: None. 왏 Example: ES-2126+(vs)# enable 쮿 set gid 왏 Syntax: set gid 왏 Description: To set the group id. 왏 Argument: : group ID 왏 Possible value: : a-z,A-Z,0-9 왏 Example: ES-2126+(vs)# set gid group1 쮿 set role 왏 Syntax: set role 왏 Description: To set role.
PAGE 267
LANCOM ES-2126+ und LANCOM ES-2126P+ 쮿 Kapitel 5: Operation of CLI Management (englisch) 왏 Description: To display the configuration of the virtual stack. 왏 Argument: None. DE 왏 Possible value: None.
PAGE 268
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 6: Appendix 6 Appendix Performance data and specifications LANCOM ES-2126+ Performance LAN protocols 802.3af Features Interfaces LANCOM ES-2126P+ Switching technology Store and forward with latency less than 5 μs MAC addresses Support of max 8K MAC addresses Throughput max. 8.
PAGE 269
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 6: Appendix EN LANCOM ES-2126+ LANCOM ES-2126P+ CE CE conformity according to EN 55022, EN 55024, EN 60950 Environment Temperature range 0–40°C; humidity 5–90%; non-condensing Accessories 쮿 1000Base-SX SFP module, LANCOM SFP-SX-LC1, item no. 61556 쮿 1000Base-LX SFP module, LANCOM SFP-LX-LC1, item no.
PAGE 270
LANCOM ES-2126+ and LANCOM ES-2126P+ 쮿 Chapter 6: Appendix 6.2 6.2.1 Connector wiring Ethernet interface 10/100Base-TX Connector 6.3 Pin Line 1 T+ 2 T- 3 R+ 4 PoE/G 5 PoE/G 6 R- 7 PoE/ -48 V 8 PoE/ -48 V EN 8-pin RJ45 sockets (ISO 8877, EN 60603-7) CE-declarations of conformity LANCOM Systems herewith declares that the devices of the type described in this documentation are in agreement with the basic requirements and other relevant regulations of the 1995/5/EC directive.