Operation Manual

LANCOM 800+ – LANCOM DSL/I- 10+ – LANCOM DSL/I- 1611 Office
 Chapter 2: Installation
23
EN
ISDN Chan2 
Status of the second logical ISDN B channel (meaning see ISDN Chan1)
ISDN-1+2 
Indicates, whether the actual ISDN connection is a static or a dynamic channel
bundling.
WAN- Rx/Tx 
This yellow LED indicates the data transfer via the WAN connection (via DSL
or cable modem).
WAN- Link 
This green LED indicates that the Ethernet connection between LANCOM
router and the DSL resp. cable modem is operational.
WAN- Chan 
This LED indicates the status of the WAN connection (via DSL or cable modem)
to the provider. The connection to the provider normally requires a login with
username and password. With time-dependent connecting rates arise
charges during this time. The meanings of the LED in detail:
LAN-Rx/Tx 
Data packet from the device to the LAN or from the LAN sent to the device
LAN-Coll 
Sending collision
LAN-Link 
The connection to the LAN is established and ready for use
LAN-Fast 
The LAN speed is 100 Mbps
Security-VPN 
In VPN gateway operation, the LED provides the VPN status information:
red physical line enabled, protocol negotiation ongoing
green protocol negotiation (X.75, PPP etc) finished, physical
and logical connection operational
green/red short red flashes indication of received data packets
off no bundled connection active
green static or dynamic channel bundling connection active
off no active connection
red establishing connection (login)
green Connection established (login successful)
off no active VPN connection
green VPN connection(s) active
red establishing a VPN tunnel