Operation Manual

LANCOM 800+ – LANCOM DSL/I- 10+ – LANCOM DSL/I- 1611 Office
 Chapter 2: Installation
22
EN
LEDs for LANCOM DSL/I-1611 Office
LANCOM DSL/I-1611
Office
Power/Msg

This LED flashes once when powering-up your device. After the self-test either
an error is indicated by a flashing, or the device starts and the LED lights con-
stantly.
ISDN S0 Status 
Indicates the status of the ISDN-S
0
connection:
ISDN Chan1 
Status of the first logical ISDN B channel (in router as well as in CAPI opera-
tion):
LANCOM DSL I/1611 Office
ISDN WAN LAN Security

 
 

 
 
 

off Device off
red flashing
once
Self-test when powering up
red blinking Constant flashing indicates time or charge limit exceeded.
Other flashing types indicate boot errors
red Device is ready for use
off not connected or no S
0
voltage (many ISDN connections dis-
able the S
0
voltage after a certain, inactive time)
green blinking initializing (establishing contact with the connection point)
green ready for use
(S
0
bus activated, TEI existing and D channel protocol checked)
green Power off LED on, but Power-LED off: device in boot monitoring
off no connection established
red blinking incoming call
green blinking outgoing call