Quick Start Guide
LANCOM VoIP USB Handset and LANCOM Advanced VoIP Client
19
Quick Start Guide
VoIP Telephony
The LANCOM VoIP USB Handset
In addition to the handset, a LANCOM VoIP USB Handset also has
a speakerphone integrated into the desk stand
a headset connector on the left side of the handset
four buttons on the right side of the handset
and a red light-emitting diode.
The button functions:
The 'Headset' button switches between the handset, the integrated
speaker on the handset and any headset connected to it.
You can adjust the volume using the two middle buttons. The volume
control affects the speech output (headset, handset, speaker) currently
being heard.
The 'Mute' button turns the microphone currently in use (handset,
headset) on or off.
What the LEDs signal:
The red LED is on whenever a line in the LANCOM Advanced VoIP Client
is active.
The red LED blinks when the speakerphone is active.
The 'headset' button is on whenever the headset speaker is activated.
Further information can be found on the supplied CD in the corresponding
user documentation in the section 'Terminal equipment'.
Headset
Volume
Mute
LED
Headset connection