Operation Manual

92
LANCOM Advanced VoIP Client
 LANCOM Advanced VoIP Client in Detail
This is how you define the properties of a Line button
햲
Click with the right mouse button on the Line button.
The shortcut menu will appear.
햳 Click on “Properties”.
The "Properties of…" window will appear.
햴 Enter the text to be shown on the Line Button in the “Label” field.
햵 Click in the drop-down list on the number(s) which should be used for this line.
 <Number> or <SIP account>
Only calls with this number or for this account go on this line.
 All Calls
All calls for your number(s).
If you have not configured any Line buttons with “All calls”, certain calls will
be signaled on the first free Line button in spite of any configuration to the
contrary. This is done to ensure that calls are connected even if there is a
misconfiguration of the Line button.
Configuring a
Line Button
Fig. 13 Line Button Properties