Operation Manual

•
81
LANCOM Advanced VoIP Client
 LANCOM Advanced VoIP Client in Detail
This is how you connect two subscribers
You are having a telephone conversation with a subscriber. You want to connect this
subscriber with a further subscriber, whom you have put on "Hold" on another line.
햲 Click on the Line button of the active connection and keep the mouse button
pressed.
햳 Drag the mouse onto the Line button of the subscriber who you would like to
connect to the subscriber of the active telephone call.
햴 Release the mouse button (Drag & Drop).
The subscribers are now connected to one another. Both lines become inactive.
For further information please refer to chapter 5.9, How do I connect two
subscribers to one another?
,page38.
This is how you start a conference
Requirement: You have at least two lines with the state of “Active” or “On
Hold”.
햲
Move per Drag & Drop the line on hold onto the active line.
The active line becomes the Conference line and the line on hold is free again.
Please make sure that you drag the line on hold to the active line - if you
drag the active line to the line on hold, the lines will be connected, and no
conference will be started.
For further information please refer to chapter 5.12,
How do I telephone with
several subscribers simultaneously (Conference)?
,page40.
 Line State
A line can have different states. You can call certain functions depending on
the state. Each state is indicated on the default user interface by an animated
graphic.
Connecting
Subscribers
Start Conference
Line State
Anima-
ted Gra-
phic
Explanation
Idle No active Call.
Handset Is Off the Hook,
Dial Tone
You hear the idle tone and you can begin dialing
the numbers.