Operation Manual

78
LANCOM Advanced VoIP Client
 LANCOM Advanced VoIP Client in Detail
햳 Click on
“Functions |
Automatic
Redial…”.
The following
window appears
in every case:
“Automatic
Redial”.
햴 Enter the target
number here, to
which you
would like to set
an Automatic Redial.
햵 Enter the time period in seconds, which should pass between two dial
attempts.
햶 Click on “Start”.
The number you have entered will now be dialed until the line is no longer busy, until
you cancel Automatic Redial, or until you begin again with another target. When
dialing, the symbol in the tray will change and you will hear a dial tone.
The state of the Line button when using Automatic Redial only changes from
“Free” to “Dialing” if LANCOM Advanced VoIP Client is dialing the desired
number.
This is how you end Automatic Redial
You have several options:
햲 Click on on the Redial button.
or
햲 Click with the right mouse button on the Redial button.
The shortcut menu will appear.
햳 Click on “Cancel Redial”.
or
햲 Go to the menu bar and click on “Functions | Redial”.
or
햲 Click with the right mouse button on the LANCOM Advanced VoIP Client user
interface.
The shortcut menu will appear.
햳 Click on “Functions | Redial”.
The Automatic Redial will be cancelled.
Fig. 12 Automatic Redial
Canceling
Automatic
Redial