Operation Manual

76
LANCOM Advanced VoIP Client
 LANCOM Advanced VoIP Client in Detail
 Configure Redial
Here you can configure the length of the Redial list, the dialing mode and
Automatic Redial.
This is how you define the properties of Redial
햲
Click with the right mouse button on the Redial button.
The shortcut menu will appear.
햳 Click on “Properties”.
The "Properties of…" window will appear.
햴 Enter the maximum number of entries to be included in the Redial List in the
field “Maximum length” located under “Redial List”.
햵 Activate the option “Dial immediately” if the number or subscriber selected
should be dialed immediately.
If this option is deactivated, you can still change the telephone number before
the actual dialing procedure takes place.
Configure
Redial