Operation Manual

74
LANCOM Advanced VoIP Client
 LANCOM Advanced VoIP Client in Detail
last number. This option is enabled in the Properties of the Redial List (see
Configure Redial ,page76).
If you click with the right mouse button on the Redial button, the numbers
last dialed and, if they are known, the names corresponding to these
numbers will be listed in the shortcut menu. Click on an entry to call a
subscriber again.
Shortcut Menu for the Redial Button
If you click with the right mouse button on the Redial button, the shortcut
menu will appear.
This is how you display the Redial List
The list contains all of the numbers which you have previously dialed.
You have several options:
햲 Go to the menu bar and click on “Lists | Show Redial List..."
or
햲 Click with the right mouse button on the Redial button.
The shortcut menu will appear.
햳 Click on “Show Redial List…”.
Menu Com-
mand
Explanation
<Numbers
Previously
Dialed>
Depending on the key configuration, the number will be redialed immedi-
ately or it will be redialed after you have selected it from a list and clicked
on the Line Button.
Redial List...
Shows the list of numbers which you have previously dialed.
Automatic
Redial…
A number is redialed.
You can enter a target number and the interval between redials. The target
number is dialed automatically until the line called is no longer busy or
until you cancel the automatic redial.
Autom.
Redial
Cancels a previously initiated Automatic Redial.
Help
Calling Online Help.
Properties
Configures the Redial List (see Configure Redial , page 76).
Click on the
“Redial”
button
Depending on the key configuration, the number will be redialed immedi-
ately or it will be redialed after you have selected it from a list and clicked
on the Line Button. For further information please refer to
Configure
Redial, page 76.
If you don't dial immediately, you can call the numbers of the redial list
one after another by clicking once again.
Show Redial List