Operation Manual

•
65
LANCOM Advanced VoIP Client
 LANCOM Advanced VoIP Client in Detail
Menu Command Explanation
Hook Off/
Disconnect Call
Hook Off/Disconnect Call.
Speed Dials
Abbreviated dialing, i.e. dialing a subscriber whose number/name
you have assigned to a Speed Dial.
Click on the arrow to list your Speed Dials. Click on the name you
want in order to call this subscriber. Or: Click on “Add/Change…” to
reassign a Speed Dial or to change an existing Speed Dial (see
chapter 7.4.10,
Speed dial , page 96).
Redial
Dials a number you have already used.
Depending on the key configuration, the number will be redialed
immediately or it will be redialed after you have selected it from a list
and clicked on the Line Button.
Automatic
Redial...
A number is redialed.
You can enter a destination number and the interval between redials.
The target number is dialed automatically until the line called is no
longer busy or until you cancel the automatic redial.
Cancel Autom.
Redial
Cancels an Automatic Redial.
Hold
Puts the active call on hold.
Click once again on this menu command to re-activate a connection
on hold.
Call Swap
Switches to the next line.
The active connection is put on hold and you are switched to the next
line. This could be either a free line or another connection, previously
on hold, which now becomes active. When you switch to a free line,
you will hear the idle tone and you can then place your call. Keep
clicking on the menu command until you have selected the line you
want (see chapter 5.8,
How do I switch between several subscribers
(Call Swap)?
,page37).
Transfer /
Call Transfer
Connects two subscribers to one another.
The active call is transferred to the call on hold. Both of your lines
will become inactive.
Transfer to
Transfers the currently active line to one of the lines on hold. This
option is only available if at least one line is on hold.
Connect to
number/URI
You can enter a new number and the call will then be transferred to
this number.
Conference (All
Lines)
If you have at least two connections, you can join all of your lines
into a Conference.