Operation Manual

•
43
LANCOM Advanced VoIP Client
 Telephoning with LANCOM Advanced VoIP Client
5.12.3 Leaving or Ending a Conference
When going on hook, there are two different situations:
 You started the conference.
In this case, the conference will be ended for all participants if you put
the handset on the hook.
 Another subscriber started the conference.
If you put the handset on the hook, you will leave the conference. A
goodbye signal will be produced for all other subscribers and the
remaining subscribers can continue to speak to one another.
All those subscribers, who you added to this conference, will leave the
conference with you. The conference will continue for all other subscribers.
This is how you leave a conference
Assumption: Another subscriber started the conference.
햲
Simply go on hook.
If a subscriber leaves a conference, a goodbye signal will be produced for all
other subscribers.
This is how you end a conference
Ending a Conference
Assumption: You started the conference.
햲
You have several options:
 If the conference line is active, simply go on hook.
 If the conference line is on hold, click with the right mouse button on the
Line button and select the entry “Terminate Conference”.
The conference is ended. The line is free again and the “Conference” button is
deactivated.
If Subscriber A of the original conference added other subscribers, e.g. B and
C, to this conference, a second conference between A, B and C will continue
to exist until Subscriber A, as initiator of the second conference, terminates
the connection and thus ends the conference.
5.13 How do I forward a call?
You can forward incoming calls to another number.
There are several different methods for forwarding incoming calls:
 Call Forwarding Unconditional: The call is immediately forwarded (“Do
Not Disturb”).
Leave
Conference