Operation Manual

38
LANCOM Advanced VoIP Client
 Telephoning with LANCOM Advanced VoIP Client
This is how to swap between an active call and a call on hold
Assumption: You have one active line and at least one other line on hold.
햲 To switch from one call to another,
 click on the appropriate Line button or
 from the "Functions" Menu, click the option "Call Swap" until the line you
want is active.
The activation of the corresponding line will be delayed. The subscriber data
will appear on the display first, so that you can quickly “run through” all of the
subscribers. Alternatively, you can immediately press the corresponding Line
button. The line currently active is highlighted.
You can have as many calls simultaneously as you have lines. This means,
however, that you have several calls on hold and one active line at the most.
5.9 How do I connect two subscribers to one another?
You are connected with two subscribers simultaneously. While you are
talking to one of the subscribers, the other is
on hold . You can now connect
these two subscribers to each other.
Example:
You are talking to Subscriber A on Line 1. Line 2 has a connection on
hold with Subscriber B. You connect Subscriber A with Subscriber B.
Then both of your lines are free again (inactive).
This is how you connect two subscribers
햲
Click on the button “Call transfer”.
Or
햲 Use Drag & Drop to move the active line to the line on hold.
The subscribers are now connected to one another. Both lines become inactive.
If you have created a second line (active line), for example for an Inquiry Call,
you can connect these two lines by putting the handset on hook or by
pressing the Speaker button. If you were called on this line, this connection
will be terminated if you put the handset on hook or press the Speaker
button. The line previously on hold will once again be active.
Switch between
Calls
Connecting
Subscribers