Operation Manual

172
LANCOM Advanced VoIP Client
 Devices
Headset Mode
Press the “headset” button once again. The "headset" button is on, the LED
is on, you hear the idle tone in the handset and via the headset.
 The handset is off hook, you are speaking
The microphone of the handset is alway on, the microphone of the headset is
always off.
The "headset" button switches between the different states:
• handset mode (default setting)
• Handset, Headset Speaker and Speakers
• Handset, Headset Speaker
Handset Mode (default)
Do not press the “headset” button. The "headset" button is on, the LED is on,
you are telephoning via the handset.
Handset, Headset and Speakers
Press the “headset” button once. The "headset" button is on, the LED blinks,
you are speaking via the handset, the speakers in the handset, in the headset
and in the desktop device are switched on.
 Handset and Headset
Press the “headset” button once again. The "headset" button is on, the LED
is on, you are speaking via the handset microphone, the speakers in the
headset and in the handset are switched on.
D.4 USB Headset Adapter without Keys
Recognized headsets without additional key functionality:
 Headset Cable K410 (GN Netcom GN8110-USB)
 Imtradex USB Adapter (AKA Micronas UAC3556B)
If such a headset is recognized by LANCOM Advanced VoIP Client
 the headset uses voice input and output
 for ringing sound output, if no other ouput option (soundcard) is
available.