Operation Manual

•
171
LANCOM Advanced VoIP Client
 Devices
 The handset is on hook, a line in LANCOM Advanced VoIP Client is
active
You will then telephone using the headset. The "headset" button is on, the
LED is on.
The "headset" button switches between the different states:
• Headset Mode
• Headset Mode and Speaker
•Speaker
Headset Mode
The "headset" button is on, the LED is on. If you receive a call, click on a line
in LANCOM Advanced VoIP Client and telephone via the headset. End the
call once again in LANCOM Advanced VoIP Client.
Headset Mode and Speaker
Press the “headset” button once. The "headset" button is on, the LED blinks,
you are telephoning via the headset. End the call once again in LANCOM
Advanced VoIP Client. The speaker in the desktop device is activated for
open listening.
Speaker
Press the “headset” button once again. The "headset" button is off, the LED
is off, you are speaking via the microphone in the handset. The speaker in the
desktop device is activated. End the call once again in LANCOM Advanced
VoIP Client.
 The handset is off hook, you hear the idle tone.
The "headset" button switches between the different states:
• handset mode (default setting)
•Speaker
Handset mode (default)
Do not press the “headset” button. The "headset" button is off, the LED is on,
you hear the idle tone in the handset.
Speaker
Press the “headset” button once. The "headset" button is on, the LED blinks,
you hear the idle tone via the speaker in the headset and in the desktop
device.