Operation Manual

•
135
LANCOM Advanced VoIP Client
 LANCOM Advanced VoIP Client Configuration
8.4.7 Ringing
You can define the telephone ring for calls on the “Ringing” tab.
It is now possible to select ringing tones which are dependent on the caller
or on the extension dialed (see chapter 8.4.7.1,
Number Dependent Ringing
Sounds
). Otherwise you can only configure a signaling via the interface (see
chapter K,
Silent “Ringing” ). The call waiting tone for the secondary call can
be switched off (see chapter K,
Secondary Call Signaling Only Visually ).
You can use any type of files that are supported by Windows Media Player
(e.g. WAV, MP3, WMA) as a ringing signal or record new ringing sounds
using LANCOM Advanced VoIP Client.
8.4.7.1 Number Dependent Ringing Sounds
Depending on the number of the caller, LANCOM Advanced VoIP Client can
select different ringing sounds. Alternatively you can also enter your
extension here. In this case it will ring differently depending on the extension
called.