Operation Manual

•
133
LANCOM Advanced VoIP Client
 LANCOM Advanced VoIP Client Configuration
8.4.5 Line Buttons
This tab is used to configure your Lines.
This is how you define the properties of the Line buttons
햲
In the first field, you define the maximum number of Line buttons to be
displayed.
햳 Open the “Line” drop-down list and select the Line to be configured.
햴 Then enter the properties of the Line button, such as the label, the associated
incoming and outgoing numbers and if necessary a wrap-up time.
For further information please refer to chapter 7.4.8, Line button ,page80.
Only those buttons, which have been defined according to the Skin definition
(e.g. Buttons 1-5 and Button 7), will be shown on the Skin.
Configuring a
Line Button
Fig. 6 Line Button Properties