Operation Manual

130
LANCOM Advanced VoIP Client
 LANCOM Advanced VoIP Client Configuration
8.4.3 Speed Dials
This tab is used to configure all your Speed Dials.
This is how you define the properties of Speed Dials
햲
In the first field, you define the maximum number of Speed Dials to be
displayed.
햳 Open the “Speed Dial” drop-down list and select the Speed Dial to be
configured.
햴 Enter the properties of this Speed Dial, such as the number, the label, an
associated picture (if the Skin allows this) and the dialing mode.
햵 Define whether
 you would like to dial the number immediately. This means that with one
click on the button, the connection will be immediately initiated.
 the display should be deleted before dialing. This means that only the
number configured here will be shown in the display. No code will precede
the number.
Configuring a
Speed Dial
Fig. 4 Configuration of the Speed Dial