Operation Manual

LANCOM Advanced VoIP Client

 LANCOM Advanced VoIP Client in Detail

햳 Click on “Properties”.

The "Properties of…" window will appear.

햴 Then, in the “Number/URI” field, enter the number to be dialed using the Speed

Dial. Valid numbers include, for example, numeric sequences or SIP URIs.

햵 Enter the text for the label of the Speed Dial in the “Label” field.

햶 Enter the file name of a graphic, in bitmap format, into the “User Bitmap” field.

This image will be displayed on the Speed Dial.

Here, for example, you can include a small portrait of the subscriber. Click on

, to search for the appropriate files.

You can only select a graphic if the Skin you use allows a user-defined image.

햷 Activate the option “Dial immediately” in order to dial the subscriber

immediately by clicking on the Speed Dial.

If this option is deactivated, you can still change the telephone number before

the actual dialing procedure takes place.

햸 Activate the option “Clear display before dialing” so that the contents of the

display only contain this number.

If this option is deactivated, the assigned number will be added to the display

contents.

Fig. 15 Configuration of the Speed Dial