Datasheet

LANCOM OAP-310agn Wireless
Scope of features: as of LCOS version 7.5
Routing functions
Router IP and NetBIOS/IP multi-protocol router
Advanced Routing and Forwarding Separate processing of 8 contexts due to virtualization of the routers. Mapping to VLANs and complete independent
management and configuration of IP networks in the device, i.e. individual settings for DHCP, DNS, Firewalling, QoS, VLAN,
Routing etc.
HTTP HTTP and HTTPS server for configuration by web interface
DNS DNS client, DNS server, DNS relay, DNS proxy and dynamic DNS client
DHCP DHCP client, DHCP relay and DHCP server with autodetection
NetBIOS NetBIOS/IP proxy
NTP NTP client and SNTP server, automatic adjustment for daylight-saving time
Policy-based routing Policy-based routing based on routing tags. Based on firewall rules, certain data types are marked for specific routing, e.g. to
particular remote sites or lines.
Dynamic routing Dynamic routing with RIPv2. Learning and propagating routes; separate settings for LAN and WAN. Extended RIPv2 including
HopCount, Poisoned Reverse, Triggered Update for LAN (acc. to RFC 2453) and WAN (acc. to RFC 2091) as well as filter options
for propagation of routes
Rapid Spanning Tree 802.1d Spanning Tree and 802.1w Rapid Spanning Tree support for dynamic path selection with redundant layer 2 connections
LAN protocols
IP ARP, proxy ARP, BOOTP, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP-1, RIP-2, RTP,
SIP, SNMP, TCP, TFTP, UDP, VRRP
WAN protocols
Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP), RIP-1, RIP-2, VLAN
Interfaces
LAN 10/100Base-TX, autosensing, auto node hub, PoE with supplied PoE Injector only
External antenna connectors Three reverse N connectors and three RP-N to N adapter cables for external LANCOM AirLancer Extender antennas or for
antennas from other vendors. Please respect the restrictions which apply in your country when setting up an antenna system.
For information about calculating the correct antenna setup, please refer to www.lancom-systems.com.
Management
LANconfig Configuration program for Microsoft Windows, incl. convenient Setup Wizards. Optional group configuration, simultaneous
remote configuration and management of multiple devices over IP connection (HTTPS, HTTP, TFTP). Configuration program
preferences per project or user or global
LANmonitor Monitoring application for Microsoft Windows for (remote) surveillance and logging of the status of LANCOM devices and
connections, incl. PING diagnosis and TRACE with filters and save to file
WLANmonitor Monitoring application for Microsoft Windows for the visualization and monitoring of LANCOM WLAN installations, incl. Rogue
AP and Rogue Client visualization
Webconfig Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP
Access rights Individual access and function rights for up to 16 administrators
User administration RADIUS user administration for dial-in access (PPP/PPTP). Support for RADSEC (Secure RADIUS) providing secure communication
with RADIUS servers
Remote maintenance Remote configuration with Telnet/SSL, SSH (with password or public key), browser (HTTP/HTTPS), TFTP or SNMP, firmware upload
via HTTP/HTTPS or TFTP. A remote configuration for devices behind der LANCOM can be accomplished (after authentication) via
tunneling of arbitrary TCP-based protocols, e.g. for HTTP(S) remote maintenance of VoIP phones or printers of the LAN
Security Access rights (read/Write) over WAN or (W)LAN can be set up separately (VPN only, Telnet/SSL, SSH, SNMP, HTTPS/HTTP), access
control list
Scripting Scripting function for batch-programming of all command-line parameters and for transferring (partial) configurations,
irrespective of software versions and device types, incl. test mode for parameter changes
SNMP SNMP management via SNMP V2, private MIB exportable by WEBconfig, MIB II
Timed control Scheduled control of parameters and actions with CRON service
TFTP TFTP client and server with variable file names (name, MAC/IP address, serial number)
Diagnosis Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging
buffer for SYSLOG and firewall events, monitor mode for Ethernet ports
LANCOM WLAN Controller Supported by all LANCOM WLAN Controller (separate optional hardware equipment for installation, optimization, operating and
monitoring of WLAN networks)
Statistics
Statistics Extensive Ethernet, IP and DNS statistics; SYSLOG error counter
Accounting Connection time, online time, transfer volumes per station. Snapshot function for regular read-out of values at the end of a
billing period.
Export Accounting information exportable via LANmonitor and SYSLOG