Datasheet

ManualsBrandsLancom Systems ManualsNetworkingOAP-310AGN

... connecting your business

LANCOM OAP-310agn Wireless

Dual-band outdoor access point (2.4 / 5 GHz) with 802.11n (Draft 2.0) mode for

netto data throughput at up to 100 Mbps over several kilometers.

쮿 When maximum performance counts

쮿 1000 mW permitted transmission power in the 5-GHz band

쮿 Professional management functions, Multi SSID, VLAN and QoS

쮿 Access point, bridge and client mode

쮿 Extremely robust IP-66 protective housing

쮿 Temperature range -30°to +65°with integrated heating/cooling

쮿 Integrated DSL router with stateful-inspection firewall

쮿 Optional: Hotspot support

Summary of content (7 pages)

PAGE 1
. . . c o n n e c t i n g y o u r LANCOM OAP-310agn Wireless Dual- band outdoor access point (2.4 / 5 GHz) with 802.11n (Draft 2.0) mode for netto data throughput at up to 100 Mbps over several kilometers.
PAGE 2
The outdoor access point LANCOM OAP- 310agn Wireless has an IP66 housing that is resistant to water jets, features integrated heating and cooling, and is suitable for wall or mast mounting—all of which makes it ideal for locations with the highest demands on performance, stability and robustness. More Performance The 802.11n draft 2.0 standard includes a number of new mechanisms that significantly increase available bandwidth. This allows a up to fivefold increase in speed over 802.
PAGE 3
LANCOM OAP-310agn Wireless Scope of features: as of LCOS version 7.5 WLAN Frequency band 2.4 GHz or 5 GHz (EU compliance) 2400 - 2483.5 MHz (ISM) or 5150 - 5750 MHz or 5725- 5825 MHz (UK only) Data rates 802.11b/g 54 Mbps to IEEE 802.11g (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5.5, 2, 1 Mbps, Automatic Rate Selection), 802.11 b/g compatibility mode or pure g or pure b Data rates 802.
PAGE 4
LANCOM OAP-310agn Wireless Scope of features: as of LCOS version 7.5 802.11n Draft 2.0 Features 40 MHz Channels Two adjacent 20 MHz channels are combined to create a single 40 MHz channel. Depending the existing RF Conditions channel bonding doubles the throughput MAC Aggregation and Block Acknowledgement MAC Aggregation increase the 802.11 MAC efficiency by combining MAC data frames and sending it out with a single header. The receiver acknowledges the combined MAC frame with a Block Acknowledgement.
PAGE 5
LANCOM OAP-310agn Wireless Scope of features: as of LCOS version 7.5 Routing functions Router IP and NetBIOS/IP multi- protocol router Advanced Routing and Forwarding Separate processing of 8 contexts due to virtualization of the routers. Mapping to VLANs and complete independent management and configuration of IP networks in the device, i.e. individual settings for DHCP, DNS, Firewalling, QoS, VLAN, Routing etc.
PAGE 6
LANCOM OAP-310agn Wireless Scope of features: as of LCOS version 7.5 Hardware Power supply Via Power over Ethernet**, 1 x PoE Injector supplied Environment - 30°C to +65°C at 95% max. humidity (non condensing) Housing 235 mm x 210 mm x 80 mm (W x H x D), 3.4 kg, robust metal housing, IP 66 protection rating, ready for wall and top- hat rail mounting, 6 LEDs for status display Power consumption (max) ca.
PAGE 7
LANCOM OAP-310agn Wireless Scope of features: as of LCOS version 7.5 Accessories Documentation LANCOM LCOS Reference Manual (DE), item no. 61700 LAN cable (outdoor) LANCOM OAP- 54 Ethernet cable 15m, item no. 61508 *) Note The Polarization Diversity antennas require 2 cables and surge arrestors Item numbers 61513 LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice.