Datasheet

LANCOM L-305agn Wireless
Scope of features: as of LCOS version 7.5
High availability / redundancy
VRRP VRRP (Virtual Router Redundancy Protocol) for backup in case of failure of a device or remote station. Enables passive standby
groups or reciprocal backup between multiple active devices including load balancing and user definable backup priorities
FirmSafe For completely safe software upgrades thanks to two stored firmware versions, incl. test mode for firmware updates
Analog/GSM modem backup Optional operation of an analog or GSM modem at the serial interface
Line monitoring Line monitoring with LCP echo monitoring, up to 4 addresses for end-to-end monitoring with ICMP polling.
Routing functions
Router IP and NetBIOS/IP multi-protocol router
Advanced Routing and Forwarding Separate processing of 8 contexts due to virtualization of the routers. Mapping to VLANs and complete independent
management and configuration of IP networks in the device, i.e. individual settings for DHCP, DNS, Firewalling, QoS, VLAN,
Routing etc.
HTTP HTTP and HTTPS server for configuration by web interface
DNS DNS client, DNS server, DNS relay, DNS proxy and dynamic DNS client
DHCP DHCP client, DHCP relay and DHCP server with autodetection
NetBIOS NetBIOS/IP proxy
NTP NTP client and SNTP server, automatic adjustment for daylight-saving time
Policy-based routing Policy-based routing based on routing tags. Based on firewall rules, certain data types are marked for specific routing, e.g. to
particular remote sites or lines.
Dynamic routing Dynamic routing with RIPv2. Learning and propagating routes; separate settings for LAN and WAN. Extended RIPv2 including
HopCount, Poisoned Reverse, Triggered Update for LAN (acc. to RFC 2453) and WAN (acc. to RFC 2091) as well as filter options
for propagation of routes
Rapid Spanning Tree 802.1d Spanning Tree and 802.1w Rapid Spanning Tree support for dynamic path selection with redundant layer 2 connections
LAN protocols
IP ARP, proxy ARP, BOOTP, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP-1, RIP-2, RTP,
SIP, SNMP, TCP, TFTP, UDP, VRRP
WAN protocols
Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP), RIP-1, RIP-2, VLAN
Interfaces
LAN 10/100/1000 Base-TX, autosensing, auto node hub, PoE compliant with IEEE 802.3af
DSL over LAN (DSLoL) The LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external DSL modems (PPPoE) or external
routers.
Serial interface Serial configuration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/
GPRS modems
Management
LANconfig Configuration program for Microsoft Windows, incl. convenient Setup Wizards. Optional group configuration, simultaneous
remote configuration and management of multiple devices over IP connection (HTTPS, HTTP, TFTP). Configuration program
preferences per project or user or global
LANmonitor Monitoring application for Microsoft Windows for (remote) surveillance and logging of the status of LANCOM devices and
connections, incl. PING diagnosis and TRACE with filters and save to file
WLANmonitor Monitoring application for Microsoft Windows for the visualization and monitoring of LANCOM WLAN installations, incl. Rogue
AP and Rogue Client visualization
Webconfig Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP
Access rights Individual access and function rights for up to 16 administrators
User administration RADIUS user administration for dial-in access (PPP/PPTP). Support for RADSEC (Secure RADIUS) providing secure communication
with RADIUS servers
Remote maintenance Remote configuration with Telnet/SSL, SSH (with password or public key), browser (HTTP/HTTPS), TFTP or SNMP, firmware upload
via HTTP/HTTPS or TFTP. A remote configuration for devices behind der LANCOM can be accomplished (after authentication) via
tunneling of arbitrary TCP-based protocols, e.g. for HTTP(S) remote maintenance of VoIP phones or printers of the LAN
Security Access rights (read/Write) over WAN or (W)LAN can be set up separately (Telnet/SSL, SSH, SNMP, HTTPS/HTTP), access control list
Scripting Scripting function for batch-programming of all command-line parameters and for transferring (partial) configurations,
irrespective of software versions and device types, incl. test mode for parameter changes
SNMP SNMP management via SNMP V2, private MIB exportable by WEBconfig, MIB II
Timed control Scheduled control of parameters and actions with CRON service