Datasheet

ManualsBrandsLancom Systems ManualsNetworkingLS61507

... connecting your business

LANCOM OAP-54 Wireless

Dual-band outdoor access point for bridging large distances, campus coverage or

for establishing hotspots

쮿 Outdoor dualband access point for 2.4- and 5-GHz operation

쮿 Two integrated 54/108 Mbps wireless modules for simultaneous operations with IEEE

802.11a/b/g/h

쮿 IP66 housing with heating and cooling for -30º to +70º

쮿 No-problems installation even away from power-supply points with Power over Ethernet

쮿 Optional connection of external antennas

쮿 Secure wireless LAN through IEEE 802.11i, IEEE 802.1x/EAP, LEPS, with AES encryption

in hardware

쮿 Secure Internet access via the integrated DSL router with stateful inspection firewall with

intrusion detection/denial-of-service protection

쮿 Separation of user groups by Multi-SSID and VLAN

쮿 Optional: VPN site coupling, Hotspot support

Summary of content (6 pages)

PAGE 1
. . . c o n n e c t i n g y o u r LANCOM OAP-54 Wireless Dual- band outdoor access point for bridging large distances, campus coverage or for establishing hotspots 쮿 Outdoor dualband access point for 2.4- and 5- GHz operation 쮿 Two integrated 54/108 Mbps wireless modules for simultaneous operations with IEEE 802.
PAGE 2
The outdoor access point LANCOM OAP- 54 Wireless has an IP66 housing which is resistant to strong water jets, features integrated heating and cooling, and can be sturdily mounted on walls or poles, all of which makes it ideally suited for locations where the demands on stability and robustness are highest. Be it in mountainous terrain or from roof to roof in the city—the LANCOM OAP- 54 Wireless can support stable, high- performance, long- serving WLANs in any environment.
PAGE 3
LANCOM OAP-54 Wireless Firewall Stateful inspection firewall Direction- dependant check based on connection information Packet filter Check based on the header information of an IP packet (IP or MAC source/destination addresses; source/destination ports, DiffServ attribute); remote- site dependant, direction dependant, bandwidth dependant Masquerading Network Address Translation (NAT), N:N mapping for the translation or masking of IP addresses Port mapping Provision of services from behind masquerade
PAGE 4
LANCOM OAP-54 Wireless WLAN Frequency band 2.4 GHz and 5 GHz (EU compliance) 2400 - 2483.5 MHz (ISM) and 5150- 5750 or 5725- 5825 MHz (UK only) Transfer rates 2.4 GHz 54 Mbps to IEEE 802.11g (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5,5, 2, 1 Mbps, Automatic Rate Selection), 802.11 b/g compatibility mode or pure g or pure b, Super A/G with Turbo Mode (108Mbps), bursting, compression Transfer rates 5 GHz 54 Mbps to IEEE 802.
PAGE 5
LANCOM OAP-54 Wireless Routing functions NTP NTP client and SNTP server, automatic adjustment for daylight- saving time Policy- based routing Policy- based routing based on routing tags. Based on firewall rules, certain data types are marked for specific routing, e.g. to particular remote sites or lines. Dynamic routing Dynamic routing with RIPv2.
PAGE 6
LANCOM OAP-54 Wireless Declarations of conformity 2.