Datasheet

ManualsBrandsLancom Systems ManualsNetworkingLS61506

... connecting your business

LANCOM IAP-54 Wireless

Dual-band access point for tough environments

쮿 Rugged dualband access point for 2.4 or 5 GHz frequencies with 54/108 Mbps with IEEE

802.11a/b/g/h

쮿 Robust metal housing with IP50 dust protection, ready for wall, top-hat rail, or pole

mounting; for deployment in warehouses, production facilities and similar environments

쮿 No-problems installation even away from power-supply points with Power-over-

Ethernet (1-port LANCOM PoE Power Injector included; not applicable to bulk version)

쮿 Secure wireless LAN through IEEE 802.11i, IEEE 802.1x/EAP, LEPS, with AES encryption

in hardware

쮿 Secure Internet access via the integrated DSL router with stateful inspection firewall with

intrusion detection/denial-of-service protection

쮿 Separation of user groups by Multi-SSID and VLAN

Summary of content (6 pages)

PAGE 1
. . . c o n n e c t i n g y o u r LANCOM IAP-54 Wireless Dual- band access point for tough environments 쮿 Rugged dualband access point for 2.4 or 5 GHz frequencies with 54/108 Mbps with IEEE 802.
PAGE 2
With an IP50- standard dust- resistant metal housing, the LANCOM IAP- 54 Wireless industrial access point has been especially designed for use in warehouses, production facilities and other demanding sites outside of the clean office environment. Three different mounting options—wall, pole, or top- hat rail—and the Power- over- Ethernet power supply meet the toughest of requirements and mean that the LANCOM IAP- 54 Wireless can be deployed just about anywhere.
PAGE 3
LANCOM IAP-54 Wireless Firewall Stateful inspection firewall Direction- dependant check based on connection information Packet filter Check based on the header information of an IP packet (IP or MAC source/destination addresses; source/destination ports, DiffServ attribute); remote- site dependant, direction dependant, bandwidth dependant Masquerading Network Address Translation (NAT), N:N mapping for the translation or masking of IP addresses Port mapping Provision of services from behind masquerade
PAGE 4
LANCOM IAP-54 Wireless WLAN Reception sensitivity 2.4 GHz 802.11g: - 87dBm @ 6Mbps, - 70dBm @ 54Mbps Reception sensitivity 5 GHz 802.11a/h: - 87dBm @ 6Mbps, - 67dBm @ 54Mbps Radio channels 2.4 GHz Up to 13 channels, max. 3 non- overlapping (2.4- GHz band) Radio channels 5 GHz Up to 19 non-overlapping channels (5 Ghz band) with automatic dynamic channel selection (DFS) Roaming Seamless handover between radio cells, IAPP support, IEEE 802.
PAGE 5
LANCOM IAP-54 Wireless Interfaces DSL over LAN (DSLoL) The LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external DSL modems (PPPoE) or external routers. Serial interface Serial configuration interface / COM port (8 pin Mini- DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/ GPRS modems External antenna connectors Two reverse SMA connectors for external LANCOM AirLancer Extender antennas or for antennas from other vendors.
PAGE 6
LANCOM IAP-54 Wireless Support Warranty 3 years, support via Hotline and Internet KnowledgeBase Software updates Regular free updates (LCOS operating system and management tools) via Internet Options Options LANCOM Service Option (24h advance replacement within Germany, 4 year warranty, not for PoE Power Injector), item no. 61401 Options LANCOM Public Spot Option (authentication and accounting software for hotspots), item no. 60642 External antennas AirLancer Extender O- 30 2.