System information

LANCOM ES-2126+ und LANCOM ES-2126P
쮿 Chapter 4: Operation of Web- based Management
87
EN
쮿 Function name: LACP Detail (LACP Aggregator Detailed Information)
쮿 Function Description: Show the detailed information of the LACP trunking
group.
쮿 Parameter Description:
왏 Actor:
The switch you are watching on.
왏 Partner: The peer system from this aggregator’s view.
왏 System Priority: Show the System Priority part of a system ID.
왏 MAC Address: Show the MAC Address part of a system ID.
왏 Port:
Show the port number part of an LACP port ID.
왏 Key: Show the key value of the aggregator. The key value is determi-
ned by the LACP protocol entity and can’t be set through manage-
ment.
왏 Trunk Status: Show the trunk status of a single member port.”---“
means “not ready”.
Zeigt ihnen den Trunk-Status eines einzelnden Portes an. Dabei bedeutet “---” das der Port nicht bereit bzw. nicht aktiv ist.### Bild von einem Aggrega tor fehlt.
쮿 Function name: LACP System Configuration
쮿 Function Description: It is used to set the priority part of the LACP system
ID. LACP will only aggregate together the ports whose peer link partners
are all on a single system. Each system supports LACP will be assigned a
globally unique System Identifier for this purpose. A system ID is a 64-bit
field comprising a 48-bit MAC Address and 16-bit priority value.
쮿 Parameter Description:
왏 System Priority: The System Priority can be set by the user. Its range is
from 1 to 65535. Default: 32768.
왏 Hash Method: DA+SA, DA and SA are three Hash methods offered for
the Link Aggregation of the switch. Packets will decide the path to
transmit according to the mode of Hash you choose.