System information

LANCOM ES-2126+ und LANCOM ES-2126P
쮿 Chapter 4: Operation of Web- based Management
80
EN
from Learning state moved to Forwarding state of a port in bridge. The
forward delay time contains two states, Listening state to Learning
state and Learning state to Forwarding state. It assumes that forward
delay time is 15 seconds, then total forward delay time will be 30
seconds. This has much to do with the STP convergent time which will
be more than 30 seconds because some other factors.
The valid value is 4 ~ 30 seconds, default is 15 seconds.
Force Version: Two options are offered for the user’s choosing STP
algorithm. One is RSTP and the other is STP. If STP is chosen, RSTP will
run as a legacy STP. The switch supports RSTP (802.1w) which is back-
ward compatible with STP (802.1d).
4.12.3 STP Port Configuration
쮿 Function name: STP Port Setting
쮿 Function Description: In the STP Port Setting, one item selection and five
parameters settings are offered for user’s setup. User can disable and
enable each port by selecting each Port Status item. User also can set
“Path Cost” and “Priority” of each port by filling in the desired value and
set “Admin Edge Port” and “Admin Point To Point” by selecting the desired
item.
쮿 Parameter Description: