System information

LANCOM ES-2126+ und LANCOM ES-2126P
쮿 Chapter 4: Operation of Web- based Management
53
EN
왏 Tx Pause Packets: Show the counting number of the transmitted pause
packet.
왏 Rx FCS Errors: Number of bad FSC packets received.
왏 Rx Alignment Errors: Number of Alignment errors packets received.
왏 Rx Fragments: Number of short frames (< 64 bytes) with invalid CRC.
왏 Rx Jabbers: Number of long frames(according tomax_length register)
with invalid CRC.
왏 Rx Drop Packets: Frames dropped due to the lack of receiving buffer.
왏 Rx Undersize Packets: Number of short frames (<64 Bytes) with valid
CRC.
왏 Rx Oversize Packets: Number of long frames(according to max_length
register) with valid CRC.
4.4 PoE
LANCOM ES-2126P
only
쮿 Function name: PoE Status
쮿 Function Description: Display the information about the PoE status.
쮿 Parameter Description:
왏 Vmain: The volt is supplied by the PoE.
왏 Imain: The sum of the current that every port supplies.
왏 Pconsume: The sum of the power that every port supplies.
왏 Power Limit: The maximal power that the switch can supply (Read
Only).
왏 Temperature: The temperature of the chip on PoE.